※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2, www.iso.org/directives
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リスト ( www.iso.org/patents ) に記載されています。
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
この文書を担当する委員会は、技術委員会 ISO/TC 30, 閉鎖導管内の流体流量の測定、小委員会 SC 7, 水道メーターを含む体積法、および OIML 技術小委員会 TC 8/SC 5水道メーターです。
この ISO 4064-1 の第 4 版は、技術的に改訂された第 3 版 (ISO 4064-1:2005) を廃止し、部分的に置き換えます。第 3 版のいくつかの規定は、ISO 4064-4:2014 で扱われています。
ISO 4064 は、以下の部分で構成されており、一般的なタイトルは「飲料水および温水用の水道メーター」です。
- Part 1: 計測および技術要件
- Part 2: テスト方法
- Part 3: テスト レポートの形式
- Part 4: ISO 4064-1 でカバーされていない非計量要件
- Part 5: インストール要件
ISO 4064-1 のこの版は、同時に発行された OIML R 49-1 の対応する版と同一です。 OIML R 49-1 は、2013 年 10 月にベトナムのホーチミン市で開催された第 48 回会合で、国際法定計量委員会による最終公表が承認されました。これは、2016 年の法定計量に関する国際会議に提出され、正式な認可を受ける予定です。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2, www.iso.org/directives .
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received, www.iso.org/patents .
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
The committees responsible for this document are Technical Committee ISO/TC 30, Measurement of fluid flow in closed conduits, Subcommittee SC 7, Volume methods including water meters and OIML Technical Subcommittee TC 8/SC 5 Water meters.
This fourth edition of ISO 4064-1 cancels and partially replaces the third edition (ISO 4064-1:2005), which has been technically revised. Some provisions of the third edition are addressed in ISO 4064-4:2014.
ISO 4064 consists of the following parts, under the general title Water meters for cold potable water and hot water:
- Part 1: Metrological and technical requirements
- Part 2: Test methods
- Part 3: Test report format
- Part 4: Non-metrological requirements not covered in ISO 4064-1
- Part 5: Installation requirements
This edition of ISO 4064-1 is identical to the corresponding edition of OIML R 49-1, which has been issued concurrently. OIML R 49-1 was approved for final publication by the International Committee of Legal Metrology at its 48th meeting in Ho Chi Minh City, Vietnam in October 2013. It will be submitted to the International Conference on Legal Metrology in 2016 for formal sanction.