※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 4126-5 は、ISO/TC 185 の技術委員会「過剰な圧力に対する保護のための安全装置」によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 4126-5:2004) を廃止し、置き換えます。また、技術正誤表 ISO 4126-5:2004/Cor 1:2006 および ISO 4126-5:2004/Cor 2:2007 も組み込まれています。
ISO 4126 は、 「過剰な圧力に対する保護のための安全装置」という一般タイトルの下に、次の部分で構成されています。
- Part 1: 安全弁
- Part 2: ディスク破裂安全装置
- Part 3: 安全弁と破裂板安全装置の組み合わせ
- Part 4: パイロット作動式安全弁
- Part 5: 制御された安全圧力解放システム (CSPRS)
- Part 6: 破裂ディスク安全装置の適用、選択、および設置
- Part 7: 共通データ
- Part 9: 独立型破裂ディスク安全装置を除く安全装置の適用および設置
- Part 気液二相流用安全弁のサイジング
- Part 11: パフォーマンス テスト1
Part 7 には、不必要な繰り返しを避けるために、ISO 4126 の複数のパートに共通するデータが含まれています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4126-5 was prepared by Technical Committee ISO/TC 185, Safety devices for protection against excessive pressure.
This second edition cancels and replaces the first edition (ISO 4126-5:2004), which has been technically revised. It also incorporates the Technical Corrigenda ISO 4126-5:2004/Cor 1:2006 and ISO 4126-5:2004/Cor 2:2007.
ISO 4126 consists of the following parts, under the general title Safety devices for protection against excessive pressure:
- Part 1: Safety valves
- Part 2: Bursting disc safety devices
- Part 3: Safety valves and bursting disc safety devices in combination
- Part 4: Pilot operated safety valves
- Part 5: Controlled safety pressure relief systems (CSPRS)
- Part 6: Application, selection and installation of bursting disc safety devices
- Part 7: Common data
- Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices
- Part 10: Sizing of safety valves for gas/liquid two-phase flow
- Part 11: Performance testing1
Part 7 contains data that is common to more than one of the parts of ISO 4126 to avoid unnecessary repetition.