この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 14, 機械および付属品のシャフトによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 4156-1:2005) を取り消して置き換えるものです。
前版との主な変更点は次のとおりです。
- ISO 268-1 は箇条 2 から削除されました。
- ISO 4156-2 および ISO 4156-3 は、箇条 2 から参考文献に移動されました。
- ベース径、外径、短径、はめ込み深さ、理論上のクリアランス、真円度、および補助寸法の定義が削除されました。
- ISO 80000-3 による 2 点間の長さと円弧の長さの記号が採用され、附属書 A の計算例で使用されています。
- 図 8, 外部スプラインと嵌合部品の間のクリアランスが修正されました。
- 図 10, スペース幅、実効値および歯厚、実効値の測定が修正されました。
- 図 11, 図のタイトルが変更されました。
- 図 15, フォーム歯の高さと副歯の高さの表示が修正されました。
- 表 11, 列 H 11 の直径 > 80 から 120 のDiiの公差が修正されました。
- 以前の表 14 から 17 は修正され、附属書 A に移動されました。
- A.4, MRe minの計算が完了しました。
ISO 4156 シリーズのすべての部品のリストは、ISO の Web サイトにあります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 14, Shafts of machinery and accessories.
This second edition cancels and replaces the first edition (ISO 4156-1:2005), which has been technically revised.
The main changes compared to the previous edition includes:
- ISO 268-1 has been removed from Clause 2;
- ISO 4156-2 and ISO 4156-3 have been moved from Clause 2 to Bibliography;
- the definitions of base diameter, major diameter, minor diameter, depth of engagement, theoretical clearance, out-of-roundness, and auxiliary dimension have been removed;
- symbols of length and arc length between two points, according to ISO 80000-3, have been adopted and used in calculation examples in Annex A;
- Figure 8, clearance between external spline and mating part has been corrected;
- Figure 10, measurement of space width, effective and tooth thickness, effective have been corrected;
- Figure 11, the figure title has been changed;
- Figure 15, the indication of form tooth height and minor tooth height has been corrected;
- Table 11, the tolerance on Dii for diameter > 80 to 120 in column H 11 has been corrected;
- the previous Tables 14 to 17 have been corrected and moved to Annex A;
- A.4, the calculation of MRe min has been completed.
A list of all parts in the ISO 4156 series can be found on the ISO website.