この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語と定義
この文書の目的のために、ISO 4427-1 および以下に示されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
電気融着ソケット継手
電気エネルギーを熱に変換してスピゴットエンドまたはパイプとの融着接続を実現できる 1 つまたは複数の一体型発熱体を含むポリエチレン (PE) 継手。
3.2
エレクトロフュージョンサドルフィッティング
電気エネルギーを熱に変換してパイプ上に融着接続を実現できる 1 つまたは複数の一体型発熱体を含むポリエチレン (PE) 継手。
3.2.1
お茶をたたく
電気融着サドルフィッティング (トップローディングまたはラップアラウンド) には、メインパイプの壁を切断するために使用される一体型カッターが含まれており、設置後もタッピングティーの本体内に残ります。
3.2.2
ブランチサドル
隣接するメインパイプに穴を開けるための補助切削工具が必要な電気融合サドルフィッティング (トップローディングまたはラップアラウンド)
3.3
スピゴットエンドフィッティング
スピゴットの長さの外径が対応するパイプの公称外径d n にwhere ポリエチレン (PE) 継手
3.4
ソケットフュージョンフィッティング
加熱ツールを使用してソケットの口がスピゴット端またはパイプと融着接続されるように設計されたポリエチレン (PE) where
3.5
製造された継手
ISO 4427-2 に準拠したパイプから製造された継手、および/またはこの文書に従って射出成形された継手から製造された継手
3.6
機械的な取り付け
ポリエチレン (PE) パイプを別の PE パイプまたは配管システムの他の要素に組み立てるための、圧力の完全性、気密性、および端部荷重に対する耐性を提供する圧縮部品を含む継手。
注記 1:継手は、半径方向の圧縮力 (圧縮継手) または軸方向の圧縮力 (フランジ接続) を生み出すことができます。
注記 2:半径方向の圧縮力によるパイプ壁のクリープを防止するために、ポリエチレン (PE) パイプに永続的な支持を提供するパイプ支持スリーブを適用することができます。場合によっては、サポートスリーブが端部耐荷重に貢献します。
注記 3: この継手では、取り外し可能なジョイントまたは永久的に組み立てられたジョイントのいずれかを使用できます。
注記 4:機械的フィッティングは、現場での組み立て用に供給することも、メーカーによって事前に組み立てられることもできます。
参考文献
| 1 | ISO 4437-3, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 3: 継手 |
| 2 | CEN/TS 12201-7, 給水用プラスチック配管システム — ポリエチレン (PE) — Part 7: 適合性評価に関するガイダンス |
| 3 | EN 60335-1, 家庭用および類似の電気機器 - 安全性- Part 1: 一般要件 (IEC 60335‑1:2001, 修正) |
| 4 | HD 60364-1, 低電圧電気設備- Part 1: 基本原則、一般特性の評価、定義 (IEC 60364‑1:2005, 修正) |
| 5 | IEC 60449, 建物の電気設備の電圧帯 |
| 6 | ISO 11922-1:2018, 流体輸送用熱可塑性プラスチックパイプ — 寸法と許容差 — Part 1: メートル系列 |
| 7 | ISO 21751, プラスチックパイプおよび継手 — 電気融着アセンブリの凝集試験 — ストリップ曲げ試験 |
| 8 | ISO/TR 10358, プラスチックパイプおよび継手 - 複合耐薬品性分類表 |
| 9 | ISO 12176-5: - 3 、プラスチックパイプおよび継手 - ポリエチレンシステムを融着接続するための機器 - Part 5: コンポーネントの 2 次元データコーディングおよび PE 配管システムのデータ交換フォーマット |
| 10 | IEC 60529:1989, エンクロージャによって提供される保護の程度 (IP コード) |
| 11 | ISO 13950, プラスチックのパイプと継手 — 電気融着接合部の自動認識システム |
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4427-1 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
electrofusion socket fitting
polyethylene (PE) fitting which contains one or more integral heating elements that are capable of transforming electrical energy into heat to realize a fusion joint with a spigot end or pipe
3.2
electrofusion saddle fitting
polyethylene (PE) fitting which contains one or more integral heating elements that are capable of transforming electrical energy into heat to realize a fusion joint onto a pipe
3.2.1
tapping tee
electrofusion saddle fitting (top-loading or wraparound) which contains an integral cutter used for cutting through the wall of the main pipe, which remains in the body of the tapping tee after installation
3.2.2
branch saddle
electrofusion saddle fitting (top-loading or wraparound) which requires an ancillary cutting tool for drilling the hole in the adjoining main pipe
3.3
spigot end fitting
polyethylene (PE) fitting where the outside diameter of the spigot length is equal to the nominal outside diameter, dn, of the corresponding pipe
3.4
socket fusion fitting
polyethylene (PE) fitting where the socket mouth is designed to be fusion-jointed with a spigot end or a pipe using heated tools
3.5
fabricated fitting
fitting produced from pipe conforming to ISO 4427-2 and/or from injection-moulded fittings in accordance with this document
3.6
mechanical fitting
fitting, that generally includes a compression part to provide pressure integrity, leaktightness and resistance to end loads, for assembling polyethylene (PE) pipe to another PE pipe or any other element of the piping system
Note 1 to entry: The fitting can create a radial compressive force (compression fitting) or an axial compressive force (flange connection).
Note 2 to entry: A pipe-supporting sleeve providing a permanent support for a polyethylene (PE) pipe to prevent creep in the pipe wall under radial compressive forces, can be applicable. In some cases, the supporting sleeve contributes to end load resistance.
Note 3 to entry: The fitting can allow either a dismountable or permanently assembled joint.
Note 4 to entry: The mechanical fitting can be supplied for field assembly or pre-assembled by the manufacturer.
Bibliography
| 1 | ISO 4437-3, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings |
| 2 | CEN/TS 12201-7, Plastics piping systems for water supply — Polyethylene (PE) — Part 7: Guidance for the assessment of conformity |
| 3 | EN 60335-1, Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335‑1:2001, modified) |
| 4 | HD 60364-1, Low-voltage electrical installations — Part 1: Fundamental principles, assessment of general characteristics, definitions (IEC 60364‑1:2005, modified) |
| 5 | IEC 60449, Voltage bands for electrical installations of buildings |
| 6 | ISO 11922-1:2018, Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| 7 | ISO 21751, Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test |
| 8 | ISO/TR 10358, Plastics pipes and fittings — Combined chemical-resistance classification table |
| 9 | ISO 12176-5:— 3 , Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems |
| 10 | IEC 60529:1989, Degrees of protection provided by enclosures (IP Code) |
| 11 | ISO 13950, Plastics pipes and fittings — Automatic recognition systems for electrofusion joints |