この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
5 略語
このドキュメントでは、次の略語が適用されます。
| DN/OD | 呼び径、外径関係 |
| LPL | 予測下限 |
| MFR | メルト マス フロー レート |
| モップ | 最高使用圧力 |
| 夫人 | 最低限必要な強度 |
| PE | ポリエチレン |
| R | レナード級数に準拠した優先数の級数 |
| SDR | 標準寸法比 |
参考文献
| [1] | ISO/TS 10839, ガス燃料の供給のためのポリエチレン パイプおよび付属品 - 設計、取り扱い、および設置に関する実施基準 |
| [2] | ISO 4065, 熱可塑性パイプ — ユニバーサル肉厚テーブル |
| [3] | ISO 3, 優先番号 — 一連の優先番号 |
| [4] | ISO 497, 一連の好ましい数値と、より丸められた数値を含む一連の数値の選択に関するガイド |
| [5] | CEN/TS 1555-7, ガス燃料供給用プラスチック配管システム — ポリエチレン (PE) — 7: 適合性評価ガイド |
| [6] | ISO 760, 水の測定 — カールフィッシャー法 (一般法) |
| [7] | PPI TR-3, 静水圧設計基準 (HDB)、静水圧設計応力 (HDS)、圧力設計基準 (PDB)、強度設計基準 (SDB)、最小必要強度 (MRS) 定格、および分類された必要強度を作成するためのポリシーと手順(CRS) 熱可塑性配管材料またはパイプ用 |
| [8] | PPI TR-22/2006, 液体石油ガスのコンポーネントのポリエチレン配管分配システム |
| [9] | PPI MS-2, 燃料ガス分配システム用のポリエチレン プラスチック パイプ、チューブおよび継手のモデル仕様、2000 年 |
5 Abbreviated terms
For the purposes of this document, the following abbreviations apply.
| DN/OD | nominal size, outside diameter related |
| LPL | lower predicted limit |
| MFR | melt mass-flow rate |
| MOP | maximum operating pressure |
| MRS | minimum required strength |
| PE | polyethylene |
| R | series of preferred numbers, conforming to the Renard series |
| SDR | standard dimension ratio |
Bibliography
| [1] | ISO/TS 10839, Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation |
| [2] | ISO 4065, Thermoplastics pipes — Universal wall thickness table |
| [3] | ISO 3, Preferred numbers — Series of preferred numbers |
| [4] | ISO 497, Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| [5] | CEN/TS 1555-7, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — 7: Guide for the assessment of conformity |
| [6] | ISO 760, Determination of water — Karl Fischer method (General method) |
| [7] | PPI TR-3, Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings, and Categorized Required Strength (CRS) for Thermoplastic Piping Materials or Pipe |
| [8] | PPI TR-22/2006, Polyethylene piping distribution systems for components of liquid petroleum gases |
| [9] | PPI MS-2, Model specification for polyethylene plastic pipe, tubing and fittings for fuel gas distribution systems, 2000 |