※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 501 は、技術委員会 ISO/TC 27, 固体鉱物燃料、小委員会 SC 5, 分析方法によって作成されました。
この第 4 版は、技術的に改訂された第 3 版 (ISO 501:2003) を廃止し、置き換えるものです。
警告 — この国際規格の使用には、危険な物質、作業、および機器が含まれる可能性があります。この国際規格は、その使用に関連するすべての安全上の問題に対処することを目的とするものではありません。適切な安全衛生慣行を確立し、使用前に規制上の制限の適用性を判断することは、この国際規格の使用者の責任です。
1 スコープ
この国際規格は、蓋付きるつぼ内で加熱したときの硬炭の膨潤特性を測定する方法を規定しています。
注「るつぼ膨潤数」(CSN) は、「自由膨潤指数」(FSI) としても知られています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 13909-4, 硬炭およびコークス — 機械的サンプリング — Part 4: 石炭 — 試験サンプルの調製
- ISO 18283, 硬炭およびコークス — 手動サンプリング
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 501 was prepared by Technical Committee ISO/TC 27, Solid mineral fuels, Subcommittee SC 5, Methods of analysis.
This fourth edition cancels and replaces the third edition (ISO 501:2003), which has been technically revised.
WARNING — Use of this International Standard can involve hazardous materials, operations and equipment. This International Standard does not purport to address all of the safety issues associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This International Standard specifies a method for determining the swelling properties of hard coal when heated in a covered crucible.
NOTE The"crucible swelling number" (CSN) is also known as the"free swelling index" (FSI).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 13909-4, Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples
- ISO 18283, Hard coal and coke — Manual sampling