この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、一般的な仮定、境界条件、および特定の (温度、湿気) 設定点、単一の建物ゾーンで。このドキュメントでは、特定の数値技法は課されていません。
このドキュメントの一般的な計算手順に基づく具体的な計算手順は、ISO 52016-1 に記載されています。 ISO 52016-1 の具体的な単純化、仮定、および境界条件は、加熱と冷却、加湿と除湿に必要なエネルギー、時間ごとの内部温度、設計上の加熱と冷却、加湿と除湿の負荷など、それぞれの適用分野に合わせて調整されています。
注記序文の表 1 は、ISO 52000-1 で規定されているモジュール構造のコンテキストで、一連の EPB 標準内でのこのドキュメントの相対的な位置を示しています。
1 Scope
This document specifies the general assumptions, boundary conditions and equations for the calculation, under transient hourly or subhourly conditions, of the internal temperatures (air and operative) and/or the heating, cooling and humidification and dehumidification loads to hold a specific (temperature, moisture) set point, in a single building zone. No specific numerical techniques are imposed by this document.
Specific calculation procedures based on the generic calculation procedures of this document are given in ISO 52016-1. The specific simplifications, assumptions and boundary conditions in ISO 52016-1 are tailored to the respective application areas, such as the energy need for heating and cooling and for humidification and dehumidification, hourly internal temperature, design heating and cooling and humidification and dehumidification load.
NOTE Table 1 in the Introduction shows the relative position of this document within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.