この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 7345, 断熱 - 物理量と定義
- ISO 9288, 断熱 — 放射による熱伝達 — 物理量と定義
- ISO 9488, 太陽エネルギー — 語彙
- ISO 9050, 建物のガラス — 光透過率、太陽直接透過率、全太陽エネルギー透過率、紫外線透過率、および関連するグレージング係数の決定
- ISO 10292, 建物のガラス — 複層ガラスの定常状態 U 値 (熱透過率) の計算
- ISO 52000-1:2017, 建物のエネルギー性能 — 包括的な EPB 評価 — 1: 一般的な枠組みと手順
- EN 410, 建物内のガラス — 窓ガラスの光および太陽光特性の決定
- EN 673, 建物のガラス — 熱透過率 (U 値) の決定 — 計算方法
- EN 14500, ブラインドおよびシャッター - 熱的および視覚的快適性 - テストおよび計算方法
注ISO 52000-1 以外の EPB 規格へのデフォルトの参照は、EPB モジュール コード番号によって識別され、附属書 A (表 A.1 の規範的テンプレート) および附属書 B (表 B.1 の有益なデフォルトの選択) に示されています。
例
EPB モジュール コード番号: M5-5, または M5-5., または M5-5/1 (M5-5 をカバーする標準の特定の条項への参照の場合)
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 7345, Thermal insulation — Physical quantities and definitions
- ISO 9288, Thermal insulation — Heat transfer by radiation — Physical quantities and definitions
- ISO 9488, Solar energy — Vocabulary
- ISO 9050, Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
- ISO 10292, Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing
- ISO 52000-1:2017, Energy performance of buildings — Overarching EPB assessment — 1: General framework and procedures
- EN 410, Glass in building — Determination of luminous and solar characteristics of glazing
- EN 673, Glass in building — Determination of thermal transmittance (U value) — Calculation method
- EN 14500, Blinds and shutters — Thermal and visual comfort — Test and calculation methods
NOTE Default references to EPB standards other than ISO 52000-1 are identified by the EPB module code number and given in Annex A (normative template in Table A.1) and Annex B (informative default choice in Table B.1).
EXAMPLE
EPB module code number: M5–5, or M5–5.1 (if module M5–5 is subdivided), or M5–5/1 (if reference to a specific clause of the standard covering M5–5).