この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
ISO 5725 では、「真度」と「精度」という 2 つの用語を使用して、測定方法の精度を表しています。 「真実性」とは、多数のテスト結果の算術平均と、真のまたは受け入れられた参照値との間の一致の近さを指します。 「精度」とは、テスト結果間の一致の近さを指します。
これらの量の一般的な考慮事項は ISO 5725-1 に記載されているため、このドキュメントでは繰り返しません。 ISO 5725-1 は、この部分を含む ISO 5725 の他のすべての部分と併せて読む必要があります。これは、基礎となる定義と一般原則を示しているためです。
このドキュメントは、各試験所が再現性条件下で同じサンプルの多数の独立した測定を実施する試験所間設計に基づいて、再現性標準偏差と再現性標準偏差を推定することのみに関係しています。精度の推定に使用できる他の設計 (入れ子、要因または分割レベルの実験など) があります。これらはこのドキュメントでは扱われませんが、ISO 5725 の他の部分の主題です。このドキュメントも同様です。 2 つの主要な測定値の中間の精度の他の測定値を検討します。それらは ISO 5725-3 の主題です。
特定の状況では、精度を推定するために実施された実験から得られたデータは、真度の推定にも使用され、測定の不確実性を評価するために使用できます。真偽の推定は、このドキュメントでは考慮されていません。真偽の推定のすべての側面は、ISO 5725-4 の主題です。 ISO 21748 の主題は、試験所間の真度と精度の推定値を使用した不確実性測定の評価です。
附属書 C は、実験によって測定方法の精度を推定する実際の例を提供します。テスト結果のバランスの取れた均一なセットを示すために、実例が示されていますが、ある例では、セルごとの可変数の反復が報告され (不均衡なデザイン)、別の例では一部のデータが欠落していました。これは、バランスを保つように設計された実験が、バランスが取れていないことが判明する可能性があるためです。ストラグラーと外れ値も考慮されます。
Introduction
ISO 5725 uses two terms, “trueness” and “precision”, to describe the accuracy of a measurement method. “Trueness” refers to the closeness of agreement between the arithmetic mean of a large number of test results and the true or accepted reference value. “Precision” refers to the closeness of agreement between test results.
General consideration of these quantities is given in ISO 5725-1 and so is not repeated in this document. ISO 5725-1 should be read in conjunction with all other parts of ISO 5725, including this part, because it gives the underlying definitions and general principles.
This document is concerned solely with estimating the repeatability standard deviation and reproducibility standard deviation based on an interlaboratory design in which each laboratory conducts a number of independent measurements of the same sample under repeatability conditions. There are other designs (such as nested, factorial or split-level experiments) which can be used for the estimation of precision: these are not dealt with in this document but rather are the subject of other parts of ISO 5725. Nor does this document consider any other measures of precision intermediate between the two principal measures; those are the subject of ISO 5725-3.
In certain circumstances, the data obtained from an experiment carried out to estimate precision are used also to estimate trueness and can be used to evaluate measurement uncertainty. The estimation of trueness is not considered in this document; all aspects of the estimation of trueness are the subject of ISO 5725-4. The evaluation of measurement uncertainty, using inter-laboratory estimates of trueness and precision, is the subject of ISO 21748.
Annex C provides practical examples of estimating the precision of measurement methods by experiment. Worked examples are given to demonstrate balanced uniform sets of test results, although in one example a variable number of replicates per cell were reported (unbalanced design) and in another some data were missing. This is because an experiment designed to be balanced can turn out to be unbalanced. Stragglers and outliers are also considered.