この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 6358-1 は、技術委員会 ISO/TC 131, 流体動力システム、小委員会 SC 5, 製品およびコンポーネントの制御によって作成されました。
この ISO 6358-1 の初版は、ISO 6358-2 および ISO 6358-3 とともに、技術的に改訂された ISO 6358:1989 を取り消して置き換えます。ただし、ISO 6358-2 および ISO 6358-3 は新しい規格であり、その範囲は ISO 6358:1989 には含まれていません。
ISO 6358 は、次の部分で構成されており、一般的なタイトルは「空気圧流体動力 - 圧縮性流体を使用したコンポーネントの流量特性の決定」です。
- Part 1: 定常流れの一般規則とテスト方法
- Part 2: 代替テスト方法
次の部分は準備中です。
- Part 3: アセンブリの定常流量特性の計算方法
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6358-1 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 5, Control products and components.
This first edition of ISO 6358-1, together with ISO 6358-2 and ISO 6358-3, cancels and replaces ISO 6358:1989, which has been technically revised. However, ISO 6358-2 and ISO 6358-3 are new standards whose scopes were not included in ISO 6358:1989.
ISO 6358 consists of the following parts, under the general title Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluid:
- Part 1: General rules and test methods for steady-state flow
- Part 2: Alternative test methods
The following parts are under preparation:
- Part 3: Method for calculating steady-state flow-rate characteristics of assemblies