この規格 プレビューページの目次
- 序文Foreword
- 序章Introduction
- 1 スコープ1 Scope
- 2 規範的参照2 Normative reference
- 3 一般用語3 General terms
- 4 熱放射を受ける、伝達する、または放射する表面に関する用語4 Terms related to surfaces either receiving, transferring or emitting a thermal radiation
- 5 熱放射を放出する表面に関する用語5 Terms related to surfaces emitting a thermal radiation
- 6 熱放射を受ける不透明または半透明の表面に関する用語6 Terms related to opaque or semi-transparent surfaces receiving a thermal radiation
- 7 熱輻射を受ける半透明媒質に関する用語 — 伝導と輻射熱伝達の組み合わせ7 Terms related to a semi-transparent medium receiving a thermal radiation — Combined conduction and radiation heat transfer
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
4 熱放射を受ける、伝達する、または放射する表面に関する用語
4.1
放射熱流量;放射束
Φ
W
電磁波の形でシステムによって放出、伝達、または受信される熱流量。
注記1:これは全半球量である.
4.2
総強度
I_
あり
4.3
総輝き
LΩ
W/(m 2・sr)
4.4
スペクトル放射熱流量
Φλ__
W/m
W/μm
4.5
スペクトル強度
I_
W/(sr m)
W/(sr μm)
4.6
分光放射輝度
L_
W/(m 3・sr)
W/(m 2・sr ・μm)
- 1各スペクトル項Aλは、次のタイプの関係によって、対応する全項Aに関連付けられます。
うーん
各方向項AΩは、次のタイプの関係によって、対応する半球項Aに関連付けられます。うーん
他のうーん
- 2全放射輝度とスペクトル放射輝度は、放射が存在する空間の各点で定義される方向付けられた量 (ベクトル) であり (図 3 を参照)、さらにそれらの値は、それらを定義するために使用される特定の表面とは無関係です。一定LΩ (4.3 を参照) で放射する光源は、等方性または拡散と呼ばれます。強度はやはり方向付けられた量ですが、表面に属します (図 2 を参照)放射流 (全体またはスペクトル) は方向付けられた量ではなく、サーフェスに属します。
4.7
熱流量ベクトルのスペクトル放射密度
W / (m2m)
4.8
熱流量ベクトルの全放射密度
w/m 3
平方メートル
4.9
熱流量のスペクトル放射密度(方向 ):
qr,q
w/m 3
W/(m 2・μm)
4.10
熱流量のスペクトル放射密度の前方成分
w/m 3
W/(m 2・μm)
4.11
熱流量のスペクトル放射密度の後方成分
W/(m 2・μm)
- 1qr,λnは次の式で表すことができます。
- 2方向に沿った一方向伝導と放射熱伝達の組み合わせでは、次のようになります。どこ
ISO 7345:1987, 2.3 で定義されている熱流量の密度です。 伝導による熱流速の密度; は、熱流量ベクトルの総放射密度です。 保護されたホットプレートまたは熱流計法で実験的に決定できます。
4 Terms related to surfaces either receiving, transferring or emitting a thermal radiation
4.1
radiant heat flow rate; radiant flux
Φ
W
Heat flow rate emitted, transferred or received by a system in form of electromagnetic waves.
Note 1 to entry: This is a total hemispherical quantity.
4.2
total intensity
IΩ
W/sr
4.3
total radiance
LΩ
W/(m2·sr)
4.4
spectral radiant heat flow rate
Φλ
W/m
W/μm
4.5
spectral intensity
IΩλ
W/(sr·m)
W/(sr·μm)
4.6
spectral radiance
LΩλ
W/(m3·sr)
W/(m2·sr·μm)
- 1 Each spectral term Aλ is related to the corresponding total term A by a relation of the type
ou
Each directional term AΩ is related to the corresponding hemispherical term A by a relation of the typeou
andou
- 2 Total radiance and spectral radiance are oriented quantities (vectors) defined in each point of space where radiation exists (see figure 3), moreover their values are independent of the particular surface used to define them. Sources which radiate with constant LΩ (see 4.3) are called isotropic or diffuse.Intensities are again oriented quantities but belong to a surface (see figure 2).Radiant flows (total or spectral) are not oriented quantities and belong to a surface.
4.7
spectral radiant density of heat flow rate vector
W/(m2·m)
4.8
total radiant density of heat flow rate vector
W/m3
W/m2
4.9
spectral radiant density of heat flow rate (in the direction ):
qr,λn
W/m3
W/(m2·μm)
4.10
forward component of the spectral radiant density of heat flow rate
W/m3
W/(m2·μm)
4.11
backward component of the spectral radiant density of heat flow rate
W/(m2·μm)
- 1 We can express qr,λn by the following expression:
- 2 In combined unidirectional conduction and radiation heat transfer along a direction , we havewhere
is the density of heat flow rate as defined in ISO 7345: 1987, 2.3; is the density of heat flow rate by conduction; is the total radiant density of heat flow rate vector; can be determined experimentally with the guarded hot plate or heat flow meter method.