この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである国家機関は、技術活動の特定の分野を扱うために、それぞれの組織によって設立された技術委員会を通じて、国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力しています。 ISO および IEC と連携して、政府および非政府の他の国際機関もこの作業に参加しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序論および/または受信した特許宣言の ISO リスト ( www.iso.org/patents を参照) または受信した特許宣言の IEC リスト ( http://patents.iec.ch )
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則に対する ISO の遵守に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html .
この文書は、合同技術委員会 ISO/IEC JTC 1, 情報技術、SC 17, 個人識別用のカードおよびセキュリティ デバイスによって作成されました。
この第 4 版は、技術的に改訂された第 3 版 (ISO/IEC 10373-6:2016) を取り消して置き換えるものです。また、改正 ISO/IEC 10373-6:2016/Amd.3:2018 も組み込まれています。
前作からの主な変更点は以下の通り。
- アクティブ基準PICCおよびPICC振幅および位相ドリフト解析ツールの導入を含む、PCD負荷変調受信およびPICC送信のテスト方法の強化。
- PICC タイプ A フレーム遅延時間 (FDT) 決定方法の導入。
- エラー訂正テスト方法によるフレームの拡張。
ISO/IEC 10373 シリーズのすべての部品のリストは、ISO Web サイトにあります。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ) or the IEC list of patent declarations received (see http://patents.iec.ch ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, SC 17, Cards and security devices for personal identification.
This fourth edition cancels and replaces the third edition (ISO/IEC 10373-6:2016), which has been technically revised. It also incorporates the Amendment ISO/IEC 10373-6:2016/Amd.3:2018.
The main changes compared to the previous edition are as follows:
- enhancement of test methods for PCD load modulation reception and PICC transmission including introduction of Active Reference PICC and PICC amplitude and phase drift analysis tool;
- introduction of PICC Type A Frame Delay Time (FDT) determination method;
- extension of frame with error correction test methods.
A list of all the parts in the ISO/IEC 10373 series can be found on the ISO website.