この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際規格は、ソフトウェア エンジニアリング ライフ サイクルの一部または全体をカバーする CASE ツールの評価と選択に関するガイドラインを提供します。 CASE ツールを評価し、いくつかの候補から最適な CASE ツールを選択するために適用されるプロセスとアクティビティを確立します。これらのプロセスは汎用的なものであるため、組織は組織のニーズに合わせてプロセスを調整する必要があります。 CASE ツールの評価と選択のプロセスは、組織のテクノロジー導入プロセスというより大きな文脈で捉える必要があります。
この国際規格では次のことが規定されています。
- a) CASE ツールに対する組織の要件を特定するためのガイダンス。
- b)それらの要件を評価対象の CASE ツール特性にマッピングするためのガイダンス。
- c)定義された特性の測定に基づいて、いくつかのツールから最も適切な CASE ツールを選択するプロセス。
この国際規格の主なユーザーは、ソフトウェア ライフ サイクル プロセスをサポートするために CASE ツールを導入しようとしている組織です。 CASE ツールのサプライヤーは、この国際規格を使用して CASE ツールの特性を説明することもできます。
この国際規格は、以下に適用することを意図していません。
- a)データ、制御、プレゼンテーションの統合メカニズムを提供することを目的としたソフトウェア エンジニアリング フレームワーク。
- b)ソフトウェアエンジニアリング活動で使用できる汎用ツール (例: ワードプロセッサ、スプレッドシート)、または非常に狭い範囲または特定の目的の CASE ツール (例: コンパイラ)
- c)組織内での CASE ツールの導入計画 (これが重要な課題であると認識されている場合でも)
注この国際標準のユーザーは、可能な限り最善の CASE ツールを選択できますが、実装が成功するという保証はありません。 ISO/IEC TR 14471 CASE ツールの採用は、この問題に対処します。
この国際規格には、カスタマイズするように設計された一連のプロセス、アクティビティ、およびタスクが含まれています。調整プロセスとは、適用可能なプロセス、アクティビティ、およびタスクを選択することです。
この国際規格への準拠は、評価および選択プロジェクトのためにこの国際規格から選択されたプロセス、活動、およびタスクの実行として定義されます。この国際規格を取引条件として課す組織は、この国際規格の特定の適用に対する準拠を構成する、必要なプロセス、活動、タスクの最小限のセットを指定する責任があります。
1 Scope
This International Standard gives guidelines for the evaluation and selection of CASE tools, covering a partial or full portion of the software engineering life cycle. It establishes processes and activities to be applied for the evaluation of CASE tools and selecting the most appropriate CASE tools from several candidates. These processes are generic, and organizations must tailor them to meet organizational needs. The CASE tool evaluation and selection processes should be viewed in the larger context of the organization’s technology adoption process.
This International Standard provides the following:
- a) guidance on identifying organizational requirements for CASE tools;
- b) guidance on mapping those requirements to CASE tool characteristics to be evaluated;
- c) a process for selecting the most appropriate CASE tool from several tools, based on measurements of the defined characteristics.
Primary users of this International Standard are organizations that intend to adopt CASE tools to support their software life cycle processes. CASE tool suppliers can also use this International Standard to describe characteristics of their CASE tools.
This International Standard is not intended to apply to:
- a) software engineering frameworks whose purpose is to provide mechanisms for data, control and presentation integration;
- b) general purpose tools (e.g. word processors, spreadsheets) which can be used in software engineering activities, nor CASE tools of very narrow scope or specific purpose (e.g. a compiler);
- c) planning for the implementation of CASE tools within an organization (even though it is recognised that this is an important subject).
NOTE A user of this International Standard can make the best possible selection of a CASE tool and yet have no guarantee of a successful implementation. ISO/IEC TR 14471 Adoption of CASE Tools addresses this subject.
This International Standard contains a set of processes, activities, and tasks designed to be tailored. The tailoring process is the selection of applicable processes, activities and tasks.
Compliance with this International Standard is defined as the performance of the processes, activities, and tasks selected from this International Standard for the evaluation and selection project. Any organization imposing this International Standard as a condition of trade is responsible for specifying the minimum set of required processes, activities, and tasks which constitute compliance for a given application of this International Standard.