この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際規格は、幅 12.7 mm, 36 トラックの磁気テープ カートリッジの物理的および磁気的特性を指定して、このようなカートリッジの交換を可能にします。また、記録される信号の品質、フォーマット、および記録方法も指定されているため、国際規格 ISO 1001 または同等の規格とともに、このような磁気テープ カートリッジによる完全なデータ交換が可能になります。
この国際規格は、この国際規格の目的のために、カートリッジ システム テープ (CST) および拡張容量カートリッジ システム テープ (ECCST) と呼ばれ、異なる厚さと長さのテープを含む 2 種類のカートリッジを指定します。
CST カートリッジの圧縮されていない公称容量は、約 400M バイトです。
ECCST カートリッジの圧縮されていない公称容量は、約 800 M バイトです。
この国際規格は、国際規格 ISO/IEC 11559 で説明されている記録形式の拡張と変更を指定します。
これらの拡張と変更
- テープに記録されるトラックの数を 18 から 36 に増やします。実際の録音は一度に 18 トラックで行われ、テープの 2 回の完全なパスが必要です。テープの先頭にテープ;
- データがテープから読み取られるときにエラーを検出して訂正するために使用される ECC 文字を定義する別の方法を指定します。
1 Scope
This International Standard specifies the physical and magnetic characteristics of 12,7 mm wide, 36-track magnetic tape cartridges to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, the format and the recording method, thus allowing, together with International Standard ISO 1001 or equivalent, full data interchange by means of such magnetic tape cartridges.
This International Standard specifies two types of cartridge which, for the purposes of this International Standard, are referred to as Cartridge System Tape (CST) and Extended Capacity Cartridge System Tape (ECCST), and contain tape of different thicknesses and lengths.
CST cartridges have a nominal uncompressed capacity of approximately 400 Mbytes.
ECCST cartridges have a nominal uncompressed capacity of approximately 800 Mbytes.
This International Standard specifies extensions and modifications to the recorded format that is described in International Standard ISO/IEC 11559.
These extensions and modifications
- increase the number of tracks recorded on the tape from 18 to 36. Actual recordings will be made 18 tracks at a time requiring two complete passes of the tape, one from the beginning of tape to the end of tape and the other from the end of tape to the beginning of tape;
- specify a different method of defining the ECC characters used to detect and correct errors when the data is read from the tape.