この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
4 つの定義
この国際規格の目的のために、次の定義が適用されます。
4.1
アルゴリズム
データの論理表現を変換するための一連の規則。
4.2
アルゴリズム的に処理されたデータ
定義された処理アルゴリズムによって処理されたデータ。
4.3
テープの始まり
ボット
記録された情報の開始によって示される、磁気テープの長さに沿ったポイント。
4.4
バイト
1 つの単位として作用する 8 ビット (9 つのエンコードされたビット) の順序付けられたセット。
4.5
巡回冗長検査 (CRC) 文字
バイト文字列の末尾に配置され、エラー検出に使用される 2 バイトで表される文字。
4.6 データ記録
4.6.1
処理されたデータ レコード
PDR
アルゴリズムを論理データ レコードに適用した結果得られるデータ エンティティ。
4.6.2
ホスト データ レコード
ホストによって最初にコンパイルされたデータ エンティティ。
4.6.3
論理データレコード
LDR
システムがホストから受信したデータ。拡張ブロックを使用するためにホストが実行したアクションに応じて、1 つまたは複数のホスト データ レコードが含まれる場合があります。
4.6.4
ユーザーデータレコード
UDR
データが処理されると、それは PDR になります。
データが処理されていない場合、LDR になります。
4.7
テープの終わり
EOT
録音が許可される BOT から最も遠いテープ上のポイント。
4.8
エラー訂正コード
ECC
エラーの検出と訂正に使用されるビットを生成する数学的手順。
4.9
磁束遷移位置
テープ表面に垂直な最大自由空間磁束密度を示す磁気テープ上のポイント。
4.10
磁束遷移間隔
連続するフラックス遷移間のトラックに沿った距離。
4.11
フレーム
論理的に関連するバイトを含むハーフ ラップ内の 18 トラックすべてにわたるセクション。
4.12
論理後方
LDR の降順を検出するテープ モーションの方向。
4.13
論理転送
LDR の昇順を検出するテープ モーションの方向。
4.14
磁気テープ
情報処理のためのデータの入力、出力、および保存を目的とした磁気信号を受け入れて保持するテープ。
4.15
マスター標準参照テープ
参照フィールド、信号振幅、解像度、オーバーライトの国際規格に選ばれたテープ。
注記 1:米国国立標準技術研究所 (NIST) では、Master Standard Reference Tape が確立されています。
4.16
パッケージ
パケット ID とパケット トレーラが追加された UD
4.17
パッドバイト
8 個の ZERO で構成されるビット パターンを持つバイト。
4.18
物理的な後方
EOT から BOT へのテープ モーションの方向。これは、Half-Wrap 2 では論理的に前方になります。
4.19
フィジカルフォワード
BOT から EOT へのテープ モーションの方向。これは、Half-Wrap 1 に対して論理的に前方になります。
4.20
物理記録密度
トラックの単位長さあたりに記録されたフラックス遷移の数。たとえば、ミリメートルあたりのフラックス遷移 (ftpmm)
4.21
加工データ
アルゴリズムによって処理されたデータ。
4.22
二次標準参照テープ
マスター スタンダード リファレンス テープの性能との関連で、その性能が知られており、記載されているテープ。
これらは、定期的なキャリブレーションで使用する 3 次基準テープのキャリブレーションに使用することを目的としています。
4.23
標準基準振幅
SRA
NIST 測定システムで 972 ftpmm のテスト記録電流で記録された場合のマスター セカンダリ リファレンス テープからの平均信号振幅。
標準参照振幅へのトレーサビリティは、各二次参照テープに付属の校正係数によって提供されます。
4.24
標準基準電流
参照フィールドを生成する電流。
4.25
テープ リファレンス エッジ
テープの基準エッジは、テープのハブ エンド (EOT) を観察者の右側にしてテープの記録面を見たときの下端です。
4.26
テスト記録電流
標準基準電流の 1.5 倍の電流。
4.27
トラック
一連の磁気信号を記録できるテープ上の縦方向の領域。
4.28
代表的な分野
972 ftpmm の物理記録密度での記録フィールドに対する平均信号振幅のプロットでは、最大平均信号振幅の 85% に等しい平均信号振幅を引き起こす最小フィールド。
4.29
変身
フォーマット前のホスト データ レコードの操作。これには、処理、パケットの形成、およびパケットの連結の操作が含まれます。
4.30
包む
BOTからEOTまで18トラック、EOTからBOTまで18トラックをシーケンシャルに収録した36トラックのセット。
4.31
ハーフラップ
同時に同じ方向に録音された 18 トラックのセット。テープには 2 つのハーフ ラップが含まれています。ハーフラップ 1 は BOT から EOT に向かって記録され、ハーフラップ 2 は EOT からボリュームの終わり (EOV) に向かって記録されます。
セクション 2 テープの特徴
セクション 3 カートリッジ
セクション 4 記録方法とフォーマット
4 Definitions
For the purposes of this International Standard, the following definitions apply.
4.1
algorithm
A set of rules for transforming the logical representation of data.
4.2
algorithmically Processed Data
Data which has been processed by a defined processing algorithm.
4.3
Beginning of Tape
BOT
The point along the length of the magnetic tape, indicated by the start of recorded information.
4.4
byte
An ordered set of eight bits (9 encoded bits) that are acted upon as a unit.
4.5
Cyclic Redundancy Check (CRC) character
A character represented by two bytes, placed at the end of a byte string and used for error detection.
4.6 Data Records
4.6.1
Processed Data Record
PDR
The data entity resulting from the application of an algorithm to the Logical Data Record.
4.6.2
Host Data Record
The data entity originally compiled by the host.
4.6.3
Logical Data Record
LDR
The data entity received by the system from the host. It may contain one or several Host Data Record(s) depending upon action taken by the host to use extended blocks.
4.6.4
User Data Record
UDR
When the data has been processed it shall be a PDR.
When the data has not been processed it shall be a LDR.
4.7
End of Tape
EOT
The point on the tape furthest from BOT up to which recording is allowed.
4.8
Error correcting code
ECC
A mathematical procedure yielding bits used for the detection and correction of errors.
4.9
flux transition position
The point on the magnetic tape that exhibits the maximum free-space flux density normal to the tape surface.
4.10
flux transition spacing
The distance along a track between successive flux transitions.
4.11
Frame
A section across all 18 tracks within a Half-Wrap containing logically related bytes.
4.12
logical backwards
The direction of tape motion that results in finding a descending order of LDRs.
4.13
logical forwards
The direction of tape motion that results in finding an ascending order of LDRs.
4.14
magnetic tape
A tape that accepts and retains magnetic signals intended for input, output, and storage of data for information processing.
4.15
Master Standard Reference Tape
A tape selected as the International Standard for Reference Field, Signal Amplitude, Resolution, and Overwrite.
Note 1 to entry: A Master Standard Reference Tape has been established at the US National Institute of Standards and Technology (NIST).
4.16
packet
A UDR with a Packet ID and Packet Trailer added.
4.17
Pad byte
A byte having a bit pattern consisting of eight ZEROs.
4.18
physical backward
The direction of tape motion from EOT to BOT. This will be logical forward for Half-Wrap 2.
4.19
physical forward
The direction of tape motion from BOT to EOT. This will be logical forward for Half-Wrap 1.
4.20
physical recording density
The number of recorded flux transitions per unit length of track, e.g. flux transitions per millimetre (ftpmm).
4.21
Processed Data
Data which has been processed by an algorithm.
4.22
Secondary Standard Reference Tape
A tape the performance of which is known and stated in relation to that of the Master Standard Reference Tape.
It is intended that these be used for calibrating tertiary reference tapes for use in routine calibration.
4.23
Standard Reference Amplitude
SRA
The Average Signal Amplitude from the Master Secondary Reference Tape when it is recorded with the Test Recording Current on the NIST measurement system at 972 ftpmm.
Traceability to the Standard Reference Amplitude is provided by the calibration factors supplied with each Secondary Reference Tape.
4.24
Standard Reference Current
The current that produces the Reference Field.
4.25
Tape Reference Edge
The Reference Edge of the tape is the bottom edge when viewing the recording side of the tape with the hub end (EOT) of the tape to the observer's right.
4.26
Test Recording Current
The current that is 1,5 times the Standard Reference Current.
4.27
track
A longitudinal area on the tape along which a series of magnetic signals can be recorded.
4.28
Typical Field
In the plot of the Average Signal Amplitude against the Recording Field at the physical recording density of 972 ftpmm, the minimum field that causes an Average Signal Amplitude equal to 85 % of the maximum Average Signal Amplitude.
4.29
transformation
The manipulation of Host Data Records before formatting. It includes the operations of processing, the formation of packets and the concatenation of packets.
4.30
Wrap
A set of 36 tracks, 18 of which are recorded from BOT to EOT and 18 of which are recorded from EOT to BOT in a sequential manner.
4.31
Half-Wrap
A set of 18 tracks which are recorded concurrently in the same direction. The tape contains two HalfWraps; Half-Wrap 1 is recorded from BOT towards EOT and Half-Wrap 2 is recorded from EOT towards End of Volume (EOV).