※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
2.1 規範的参照
以下の規格には、本文中の参照を通じて、この規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての標準は改訂される可能性があり、この標準に基づく契約の当事者は、以下にリストされている標準の最新版を適用する可能性を調査することをお勧めします。
IEC および ISO のメンバーは、現在有効な規格の登録簿を維持しています。
2.2 承認された参照
- EIA-700A0A, シングル コネクタ アタッチメント (SCA-2) で使用される 1.27 mm ピッチ 2 列の取り外し不可能なリボン コンタクトを備えた台形コネクタの詳細仕様
- EIA-700A0A, VHDCI ( Very High Density Cable Interconnect) で使用される台形コネクタ 0.8 mm ピッチの詳細仕様
- IEC 60512-2:1985, 電子機器の電気機械部品;基本的な試験手順と測定方法 — 2: 一般試験、電気的導通および接触抵抗試験、絶縁試験および電圧ストレス試験
- IEC 60512-11-7:1996, 電子機器の電気機械部品 — 基本的な試験手順と測定方法 — 11: 気候試験 — セクション 7: 試験 11g: 流動混合ガス腐食試験
- ISO 1660, 技術図面 — プロファイルの寸法と公差
2.3 開発中のリファレンス
発行の時点で、次の参照規格はまだ開発中でした。ドキュメントの現在のステータス、または入手可能性に関する情報については、関連する標準化団体または示されているその他の組織にお問い合わせください。
- ISO/IEC 14776-112 — 情報技術 — 小型コンピュータ システム インターフェイス (SCSI) — 112: パラレル インターフェイス 2 (SPI-2)
- ISO/IEC 14776-312 — 情報技術 — 小型コンピュータ システム インターフェイス (SCSI) — 312: 主なコマンド-2
- ISO/IEC 14776-412 — 情報技術 — 小型コンピュータ システム インターフェイス (SCSI) — 412: 建築模型-2
2.4 その他の参考文献
リストされたドキュメントの現在のステータス、または入手可能性に関する情報については、指定された組織にお問い合わせください。
IEEE 1364, Verilog® ハードウェア記述言語
2 Normative references
2.1 Normative references
The following standards contain provisions which, through reference in the text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below.
Members of IEC and ISO maintain registers of currently valid standards.
2.2 Approved references
- EIA-700A0AE (SP-3651), Detail Specification for Trapezoidal Connectors with Non-removable Ribbon Contacts on 1.27 mm Pitch Double Row used with Single Connector Attachments (SCA-2)
- EIA-700A0AF (SP-3652), Detail Specification for Trapezoidal Connector 0.8 mm Pitch used with Very High Density Cable Interconnect (VHDCI)
- IEC 60512-2:1985, Electromechanical components for electronic equipment; basic testing procedures and measuring methods — 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
- IEC 60512-11-7:1996, Electromechanical components for electronic equipment — Basic testing procedures and measuring methods — 11: Climatic tests — Section 7: Test 11g: Flowing mixed gas corrosion test
- ISO 1660, Technical drawings — Dimensioning and tolerancing of profiles
2.3 References under development
At the time of publication, the following referenced standards were still under development. For information on the current status of the document, or regarding availability, contact the relevant standards body or other organization as indicated.
- ISO/IEC 14776-112, — Information technology — Small computer system interface (SCSI) — 112: Parallel lnterface-2 (SPI-2)
- ISO/IEC 14776-312, — Information technology — Small computer system interface (SCSI) — 312: Primary Commands-2
- ISO/IEC 14776-412, — Information technology — Small computer system interface (SCSI) — 412: Architecture Model-2
2.4 Other references
For information on the current status of the listed document(s), or regarding availability, contact the indicated organization.
IEEE 1364, Verilog® Hardware Description Language