この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 つの定義
3.1この勧告 |国際規格では、ISO/IEC 9545 で定義されている次の用語を使用しています。
- a)アプリケーションプロセスタイプ。
- b)アプリケーションプロセス呼び出し。
3.2この勧告 |国際規格では、ITU-T Rec. X.210 | で定義されている次の用語を使用しています。 ISO/IEC 10731:
- a) (N)-サービス要求プリミティブ。
- b) (N)-サービス表示プリミティブ。
- c) (N)-サービス応答プリミティブ。
- d) (N)-サービス確認プリミティブ。
3.3この勧告 |国際規格では、ITU-T Rec. X.213 | で定義されている次の用語を使用しています。 ISO/IEC 8348:
- サブネットワークの接続点。
3.4この勧告の目的のために |国際規格、次の定義が適用されます。
3.4.1
(N)-アドレス
同じオープン システム内の (N) サブシステムと (N + 1) サブシステムの間の境界にすべて配置されている (N) サービス アクセスポイントのセットを識別するために使用される、OSIE 内で明確な名前。
- 1この (N) アドレスの定義は、ITU-T Rec. X.200 の定義とは異なります。 ISO/IEC 7498-この定義は決定的なものであり、ITU-T Rec. X.200 に移されます。 ISO/IEC 7498-1 は、ITU-T Rec. X.200 | ISO/IEC 7498-1 が改訂されました。
- 2名前が特定のスコープ内のオブジェクトを 1 つだけ識別する場合、名前はそのスコープ内で明確です。名前が明確であっても、同義語の存在が排除されるわけではありません。
3.4.2
(N)-アドレスセレクター
(N)セレクター
すべて同じ (N)-サブシステムにある (N)-SAP のセットを識別するアドレス指定情報の要素。 (N)-selector 値は、ローカル管理者によって割り当てられます。
注記1: (N)アドレスセレクタの概念は、ネットワーク層の上にのみ適用される
3.4.3
(N)協会
(N)-entity-invocations 間の協調関係。
注記 1:これは、(N) プロトコル制御情報の交換によって形成される場合がある。
3.4.4
発(N)アドレス
(N)-サービス要求または表示プリミティブに表示される可能性があり、(N)-イニシエータの (N)-アドレスを識別するパラメータ。
注記 1特定の層のサービス定義では、そのようなパラメータは「calling-(N)-address」または「source-address」と呼ばれる場合があります。ただし、この仕様では、「calling-(N)-address」という用語のみが使用されます。
3.4.5
着(N)アドレス
(N)-受信者の(N)-アドレスを識別する、(N)-サービス要求または表示プリミティブに表示されるパラメータ。
注記 1特定の層のサービス定義では、そのようなパラメータは「被呼(N)アドレス」または「宛先アドレス」と呼ばれることがある。この勧告を通して |ただし、国際標準では、「着 (N) アドレス」という用語だけが使用されます。
3.4.6
わかりやすい名前
セットのオブジェクトのプロパティに関するアサーションのセットによって、1 つまたは複数のオブジェクトのセットを識別する名前。
3.4.7
(N)-ディレクトリ機能
(N)-アドレス、(N − 1)-アドレス、(N)-エンティティ タイトル、および (N)-PAI を処理して、これらのカテゴリの情報間のマッピングを提供する (N)-関数。
3.4.8
(N) 実体
特定の (N) エンティティ タイプに対応する (N) 層用に定義された一連の機能を具体化する (N) サブシステム内のアクティブな要素 (追加の機能は使用されません)
注記 1 (N)-entity のこの定義は、ITU-T 勧告 X.200 の定義とは異なります。 ISO/IEC 7498-この定義は決定的なものであり、ITU-T Rec. X.200 に移されます。 ISO/IEC 7498-1 は、ITU-T Rec. X.200 | ISO/IEC 7498-1 が改訂されました。
3.4.9
(N)-実体呼び出し
特定の (N) エンティティの一部またはすべての機能の特定の使用 (余分な機能は使用されません)
注記 1:この定義は ITU-T Rec. X.200 に移されます。 ISO/IEC 7498-1 は、ITU-T Rec. X.200 | ISO/IEC 7498-1 が改訂されました。
3.4.10
(N)-実体タイトル
(N) エンティティを明確に識別するために使用される名前。
3.4.11
(N)-実体型
(N)-レイヤーに対して定義された一連の機能に関する (N)-エンティティーのクラスの記述。
注記 1:この定義は ITU-T Rec. X.200 に移されます。 ISO/IEC 7498-1 は、ITU-T Rec. X.200 | ISO/IEC 7498-1 が改訂されました。
3.4.12
一般名
オブジェクトのセットの名前。
注記1一般名称は一般名の特定の形式である。
3.4.13
(N)-開始剤
(N − 1) サービス要求プリミティブを発行する (N) エンティティ呼び出し。
3.4.14
姓
言説の世界の対象に対応する言語構造。
3.4.15
命名機関
指定された規則に従って名前を割り当てる登録機関。命名機関がタイトルを割り当てる場所は、タイトル機関として知られています。命名機関がアドレスを割り当てる場所は、アドレス指定機関として知られています。
3.4.16
命名ドメイン
特定のタイプのオブジェクトに割り当て可能な一連の名前。名前がタイトルである場合、セットはタイトル ドメインとして知られています。名前がアドレスである場合、そのセットはアドレス指定ドメインと呼ばれます。
3.4.17
命名サブドメイン
その命名ドメインの他のすべての命名サブドメインから切り離されている、命名ドメインのサブセット。
3.4.18
プリミティブ名
オブジェクトを識別し、指定された命名機関によって割り当てられる名前。名前の内部構造を理解する必要はなく、名前のユーザーにとって意味を持つ必要もありません。
3.4.19
(N)-受信者
(N − 1) サービス指示プリミティブを受け取る (N) エンティティ呼び出し。
3.4.20
(N)プロトコルアドレッシング情報
(N)-パイ
アドレス指定情報を含む (N)-PCI の要素。
3.4.21
応答 (N) アドレス
(N)-サービス応答または確認プリミティブに表示される可能性があり、(N)-受信者の (N)-アドレスを識別するパラメータ。
注記 1特定の層のサービス定義では、そのようなパラメータは「被呼アドレス」または「応答アドレス」と呼ばれる場合があります。この勧告を通して |ただし、国際標準では、「対応する (N) アドレス」という用語のみが使用されます。
3.4.22
(N)-サービスアクセスポイントアドレス
(N)-SAP アドレス
単一の (N)-SAP を識別するために使用される (N)-アドレス。
- 1 (N)-service-access-point-address のこの定義は、ITU-T Rec. X.200 の定義とは異なります。 ISO/IEC 7498-この定義は決定的なものであり、ITU-T Rec. X.200 に移されます。 ISO/IEC 7498-1 は、ITU-T Rec. X.200 | ISO/IEC 7498-1 が改訂されました。
- 2 (N)-アドレスは、(N)-SAP の任意のセットに適用される一般的な用語であり、1 つだけの (N)-SAP のセットを含みます。 (N)-SAP アドレスは、アドレスが (N)-SAP を 1 つだけ識別することを正確に指定する必要がある場合にのみ使用されます。 (N)-アドレスが (N)-SAP アドレスであるかどうかは、(N)-サブシステムに固有の問題であり、他のオープン システムにはわかりません。それにもかかわらず、一部の層では、その後の通信で使用される可能性があるため、呼び出し (N) アドレスと応答 (N) アドレスは、単一の (N)-SAP を識別するように制約される場合があります (8.4.4 および 8.5.5 を参照) )。この制約を適用するかどうかの決定は、レイヤーごとおよびプロトコルごとに行われます。
3.4.23
サブネットワークアドレス
サブネットワークの登録機関によってサブネットワークの接続点に割り当てられた識別子。
3.4.24
名前を発音する
シノニム
別の別個の名前によっても識別されるオブジェクトを識別する名前。同義の総称名は、同一のセットに名前を付ける別個の総称名です。
3.4.25
システムタイトル
単一の実際のオープン システムを識別するために使用される、OSIE 内で一意の名前。
3 Definitions
3.1 This Recommendation | International Standard makes use of the following terms defined in ISO/IEC 9545:
- a) application-process-type;
- b) application-process-invocation.
3.2 This Recommendation | International Standard makes use of the following terms defined in ITU-T Rec. X.210 | ISO/IEC 10731:
- a) (N)-service-request-primitive;
- b) (N)-service-indication-primitive;
- c) (N)-service-response-primitive;
- d) (N)-service-confirm-primitive.
3.3 This Recommendation | International Standard makes use of the following term defined in ITU-T Rec. X.213 | ISO/IEC 8348:
- subnetwork point of attachment.
3.4 For the purposes of this Recommendation | International Standard, the following definitions apply.
3.4.1
(N)-address
A name unambiguous within the OSIE which is used to identify a set of (N)-service-accesspoints which are all located at a boundary between an (N)-subsystem and an (N + 1)-subsystem in the same open system.
- 1 This definition of (N)-address is different from that in ITU-T Rec. X.200 | ISO/IEC 7498-1. This definition is the definitive one and will be moved to ITU-T Rec. X.200 | ISO/IEC 7498-1 to replace the existing definition when ITU-T Rec. X.200 | ISO/IEC 7498-1 is revised.
- 2 A name is unambiguous within a given scope when it identifies one, and only one, object within that scope. Unambiguity of a name does not preclude the existence of synonyms.
3.4.2
(N)-address-selector
(N)-selector
An element of addressing information that identifies a set of (N)-SAPs which are all in the same (N)-subsystem; an (N)-selector value is assigned by the local administration.
Note 1 to entry: The concept of (N)-address-selectors only applies above the Network Layer
3.4.3
(N)-association
A cooperative relationship among (N)-entity-invocations.
Note 1 to entry: This may be formed by the exchange of (N)-protocol-control-information.
3.4.4
calling-(N)-address
A parameter which may appear in an (N)-service request or indication primitive and which identifies the (N)-address at the (N)-initiator.
Note 1 to entry: In the service definition of a particular layer, such a parameter may be referred to either as a"calling-(N)-address" or"source-address". Throughout this Specification, however, only the term"calling-(N)-address" is used.
3.4.5
called-(N)-address
A parameter which may appear in an (N)-service request or indication primitive which identifies the (N)-address at the (N)-recipient.
Note 1 to entry: In the service definition of a particular layer, such a parameter may be referred to either as a"called-(N)-address" or"destination-address". Throughout this Recommendation | International Standard, however, only the term"called-(N)-address" is used.
3.4.6
descriptive name
A name that identifies a set of one or more objects by means of a set of assertions concerning the properties of the objects of the set.
3.4.7
(N)-directory-function
An (N)-function that processes (N)-addresses, (N − 1)-addresses, (N)-entity-titles, and (N)-PAI to provide mappings among these categories of information.
3.4.8
(N)-entity
An active element within an (N)-subsystem embodying a set of capabilities defined for the (N)-layer that corresponds to a specific (N)-entity-type (without any extra capabilities being used).
Note 1 to entry: This definition of (N)-entity is different from that in ITU-T Rec. X.200 | ISO/IEC 7498-1. This definition is the definitive one and will be moved to ITU-T Rec. X.200 | ISO/IEC 7498-1 to replace the existing definition when ITU-T Rec. X.200 | ISO/IEC 7498-1 is revised.
3.4.9
(N)-entity-invocation
A specific utilization of part or all capabilities of a given (N)-entity (without any extra capabilities being used).
Note 1 to entry: This definition will be moved to ITU-T Rec. X.200 | ISO/IEC 7498-1 to replace the existing definition when ITU-T Rec. X.200 | ISO/IEC 7498-1 is revised.
3.4.10
(N)-entity-title
A name that is used to identify unambiguously an (N)-entity.
3.4.11
(N)-entity-type
A description of a class of (N)-entities in terms of a set of capabilities defined for the (N)-layer.
Note 1 to entry: This definition will be moved to ITU-T Rec. X.200 | ISO/IEC 7498-1 to replace the existing definition when ITU-T Rec. X.200 | ISO/IEC 7498-1 is revised.
3.4.12
generic name
A name of a set of objects.
Note 1 to entry: A generic-title is a specific form of generic name.
3.4.13
(N)-initiator
An (N)-entity-invocation which issues an (N − 1)-service request primitive.
3.4.14
name
A linguistic construct which corresponds to an object in some universe of discourse.
3.4.15
naming-authority
A registration authority which allocates names according to specified rules. Where the naming-authority allocates titles, it is known as a title-authority. Where the naming-authority allocates addresses, it is known as an addressing-authority.
3.4.16
naming-domain
The set of names that are assignable to objects of a particular type. Where the names are titles, the set is known as a title-domain. Where the names are addresses, the set is known as an addressing-domain.
3.4.17
naming-subdomain
A subset of a naming-domain, which is disjoint from all other naming-subdomains of that naming-domain.
3.4.18
primitive name
A name that identifies an object and which is assigned by a designated naming-authority. The internal structure of the name is not required to be understood or to have significance to users of the name.
3.4.19
(N)-recipient
An (N)-entity-invocation which receives an (N − 1)-service indication primitive.
3.4.20
(N)-protocol-addressing-information
(N)-PAI
Those elements of (N)-PCI which contain addressing information.
3.4.21
responding-(N)-address
A parameter which may appear in an (N)-service response or confirm primitive and which identifies the (N)-address at the (N)-recipient.
Note 1 to entry: In the service definition of a particular layer, such a parameter may be referred to either as a"called-address" or"responding address". Throughout this Recommendation | International Standard, however, only the term"responding-(N)-address" is used.
3.4.22
(N)-service-access-point-address
(N)-SAP-address
An (N)-address that is used to identify a single (N)-SAP.
- 1 This definition of (N)-service-access-point-address is different from that in ITU-T Rec. X.200 | ISO/IEC 7498-1. This definition is the definitive one and will be moved to ITU-T Rec. X.200 | ISO/IEC 7498-1 to replace the existing definition when ITU-T Rec. X.200 | ISO/IEC 7498-1 is revised.
- 2 (N)-address is the general term which applies to any set of (N)-SAPs, including sets of one, and only one, (N)-SAP. (N)-SAP address is only used where it is necessary to specify precisely that the address identifies one, and only one, (N)-SAP. Whether an (N)-address is an (N)-SAP address or not is a matter local to the (N)-subsystem and is not known to other open systems. Nevertheless, at some layers and because of their possible use in subsequent communications, calling-(N)-addresses and responding(N)-addresses may be constrained to identify a single (N)-SAP (see 8.4.4 and 8.5.5). The decision whether or not to apply this constraint is made on a layer-by-layer and protocol-by-protocol basis.
3.4.23
subnetwork-address
An identifier assigned to a subnetwork point of attachment by the registration authority of the subnetwork.
3.4.24
synonymous name
synonym
A name that identifies an object that is also identified by another distinct name. Synonymous generic names are distinct generic names that name the identical set.
3.4.25
system-title
A name, unique within the OSIE, which is used to identify a single real open system.