この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) および IEC (国際電気標準会議) は、国家標準化団体 (ISO メンバー団体および IEC 国内委員会) の世界的な連合体です。国際規格の作成作業は、通常、ISO および IEC の技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も、ISO または IEC と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の URL を参照してください。 www.iso.org/iso/foreword.html
この文書は ISO 消費者政策委員会 (COPOLCO) によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO/IEC Guide 14:2003) を廃止し、置き換えるものです。
前版との主な変更点は以下の通りです。
- 製品のパッケージに記載されている、新しい購入情報ラベル付けツール (QR コードや RFID タグなど) についての言及。
- ISO/IEC Guide 37, ISO/IEC Guide 41, および IEC 82079-1 との関係の明確化。
- 社会的弱者の製品情報ニーズを考慮する。
- リサイクルおよび中古品に関するコンテンツが追加されました。
- リスク、持続可能性、プライバシーの問題への対応の改善。
- 性能と使用条件、および信頼性の考慮事項に関する新しい条項の追加。
- 購買情報機関および購買情報システム上の古いコンテンツの削除。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) are worldwide federations of national standards bodies (ISO member bodies and IEC National Committees). The work of preparing International Standards is normally carried out through ISO and IEC technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO or IEC, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by the ISO Committee on Consumer Policy (COPOLCO).
This third edition cancels and replaces the second edition (ISO/IEC Guide 14:2003), which has been technically revised.
The main changes compared with the previous edition are as follows:
- mention of new purchase information labelling tools (e.g. QR codes or RFID tags), available on the packaging of the product;
- clarification of the relationship with ISO/IEC Guide 37, ISO/IEC Guide 41 and IEC 82079-1;
- consideration of the product information needs of vulnerable persons;
- content added on recycling and second-hand goods;
- improved treatment of risk, sustainability and privacy issues;
- addition of new clauses on performance and conditions of use and dependability considerations;
- deletion of obsolete content on purchase information bodies and purchase information systems.