この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) と IEC (国際電気標準会議) は、世界標準化のための専門システムを形成しています。 ISO または IEC のメンバーである各国団体は、特定の技術活動分野に対処するためにそれぞれの組織によって設立された技術委員会を通じて国際規格の開発に参加しています。 ISO と IEC の技術委員会は、相互に関心のある分野で協力します。政府および非政府の他の国際機関も、ISO および IEC と連携してこの作業に参加しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部に規定されている規則に従って起草されました ( www.iso.org/directives を 参照)
IEEE 標準文書は、IEEE Societies および IEEE Standards Association (IEEE-SA) 標準委員会の標準調整委員会内で開発されています。 IEEE は、米国規格協会によって承認されたコンセンサス開発プロセスを通じて標準を開発します。このプロセスでは、さまざまな視点や関心を代表するボランティアが集まり、最終製品を完成させます。ボランティアは必ずしも研究所のメンバーである必要はなく、無償で奉仕します。 IEEE はプロセスを管理し、コンセンサス開発プロセスの公平性を促進するルールを確立しますが、規格に含まれる情報の正確性を独立して評価、テスト、検証することはありません。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO および IEC は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受領した特許宣言の ISO リスト ( www.iso.org/patents を参照)、または受領した特許宣言の IEC リスト ( http://patents.iec.ch を参照) に記載されます。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は、ISO と IEEE の間のパートナー標準開発組織協力協定に基づいて、ISO/IEC JTC 1 合同技術委員会、情報技術、サブ委員会 SC 7, システムおよびソフトウェア エンジニアリングによって、IEEE コンピュータ協会のシステムおよびソフトウェア エンジニアリング標準委員会と協力して作成されました。
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the rules given in the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ) or the IEC list of patent declarations received (see http://patents.iec.ch ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 7, Systems and software engineering, in cooperation with the Systems and Software Engineering Standards Committee of the IEEE Computer Society, under the Partner Standards Development Organization cooperation agreement between ISO and IEEE.