この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語と定義
このドキュメントの目的のために、ISO/IEC 19762 (すべての部分) に記載されている用語と定義、および以下が適用されます。
3.1
パッシブ RFID トランスポンダー
アンテナに結合された RFID 集積回路 (チップ) の組み合わせ。アンテナは、双方向無線通信と、リーダー RF 信号から電力を引き出して RFID チップを動作させるために使用されます。
3.2
インレットドライ
基板 (通常は透明なフィルム) に取り付けられた RFID トランスポンダ (チップとアンテナ) は、トランスポンダを取り扱うための物理的な手段を提供します。
3.3
入口ウェット
パッケージに取り付けるための接着剤層でコーティングされた基板に取り付けられた RFID トランスポンダ (チップとアンテナ)
3.4
インレイ
別の表面に取り付けるための、剥離ライナー上の接着剤付き注入口
3.5
輸送ユニット
- 1)ケース、スリーブ、トレイ、バンドル (クラフト紙またはポリラップ)、バッグ、サック、硬質容器 (タブ、トート、ドラム缶など)
- 2)輸送パッケージまたはユニットロードのいずれか
[出典: ISO 15394, 4.2]
3.6
一次パッケージ
- 1)製品の封じ込めの最初のラップ
- 2)製品と直接接触するように設計された包装
[出典: ISO 21067, 2.2.2]
3.7
メディア
物理的なラベル、タグ、またはチケットを指します
図 1 — RFID のサプライ チェーン層
参考文献
| [1] | ISO/IEC 24729-2, 情報技術 — アイテム管理のための無線自動識別 — 実装ガイドライン — 2: リサイクルとRFIDタグ |
| [2] | ISO/IEC 24729-3, 情報技術 — アイテム管理のための無線自動識別 — 実装ガイドライン — 3: 物流アプリケーションにおける UHF RFID インテロゲーター システムの実装と運用 |
| [3] | 入力データから CRC-16 をオンラインで計算する方法は、次の場所にあります。 http://www.lammertbies.nl/comm/info/crc-calculation.html |
| [4] | AIM グローバル - REG-401:軍事物流における RFID 対応ラベルの使用に関するガイドライン案: MIL-STD-129 の改訂に関する推奨事項 |
| [5] | EPCglobal ハードウェア認定マーク — 情報は次の場所にあります。 http://www.epcglobalinc.org/certification/hw_cert/ |
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 19762 (all parts) and the following apply.
3.1
passive RFID transponder
combination of an RFID integrated circuit (chip) bonded to an antenna, where the antenna is used for both two-way wireless communication and to draw power from the reader RF signal to operate the RFID chip
3.2
inlet dry
RFID transponder (chip and antenna) attached to substrate (typically a clear film) providing a physical means to handle the transponder
3.3
inlet wet
RFID transponder (chip and antenna) attached to a substrate that is coated with a layer of adhesive for attachment to a package
3.4
inlay (inlet wet)
inlet with adhesive, on a release liner, for attaching to another surface
3.5
transport unit
- 1) cases, sleeves, trays, bundles (Kraft paper or poly wrapped), bags, sacks, rigid containers (tubs, totes, drums etc.)
- 2) either a transport package or a unit load
[SOURCE: ISO 15394, 4.2]
3.6
primary package
- 1) first wrap on containment of the product
- 2) packaging designed to come into direct contact with the product
[SOURCE: ISO 21067, 2.2.2]
3.7
media
refers to the physical label, tag or ticket
Figure 1—Supply chain layers of RFID
Bibliography
| [1] | ISO/IEC 24729-2, Information technology — Radio frequency identification for item management — Implementation guidelines – 2: Recycling and RFID tags |
| [2] | ISO/IEC 24729-3, Information technology — Radio frequency identification for item management — Implementation guidelines — 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications |
| [3] | An on-line method for the calculation of the CRC-16 from input data can be found at: http://www.lammertbies.nl/comm/info/crc-calculation.html |
| [4] | AIM Global - REG-401: Proposed Guidelines for the Use of RFID-Enabled Labels in Military Logistics: Recommendations for Revision of MIL-STD-129 |
| [5] | EPCglobal Hardware Certification Mark — Information can be found at: http://www.epcglobalinc.org/certification/hw_cert/ |