この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
このテクニカル レポートは、幾何学的製品仕様 (GPS) 文書であり、グローバルな GPS 文書と見なされます (ISO/TR 14638 を参照)これは、標準のチェーンのチェーン リンク 4, 5, および 6 に影響します。
このテクニカル レポートと他の規格および GPS マトリックス モデルとの関係の詳細については、付録 C を参照してください。
温度測定の不確実性と基準温度以外での測定は、測長結果の不確実性につながります。さらに、標準参照温度以外で測定すると、測定結果に系統誤差が生じます。
このテクニカル レポートで取り上げる原則は、ほとんどの材料は温度が変化すると膨張または収縮するということです。測定が行われる温度が標準参照温度である場合、公称熱膨張はゼロですが、温度測定の不確実性は測定結果の不確実性につながります。標準参照温度以外の温度で長さ測定を行うと、熱膨張差が生じます。これは、作業標準と比較して測定器を調整するときと、ワークピースを測定するために使用するときの両方で発生する可能性があります。
ワークピース、作業標準、測定器の温度と熱変化に対する応答がわかっている場合は、熱膨張差の補正を行うことができます。温度または応答を正確に知ることは不可能です。したがって、補正と測定結果に不確実性が生じます。このテクニカル レポートでは、関連する系統誤差を計算し、測定の不確かさに対する熱の影響を評価する方法を示します。
熱効果による結果として生じる標準不確かさ成分は、測定の結合標準不確かさを評価するために、通常の方法 (GUM を参照) で結合されるものとします。
必要に応じて、適切な決定規則 (たとえば、ワークピースの公差の許容範囲、または ISO 14253-1 で具体化されているもの) を呼び出して、ワークピースの適合性の決定に対する熱による寸法の不確実性の結果を判断できるようにすることができます。
ISO/TR 16015 は、ISO 1 をサポートするために開発されました。
ISO 1 をサポートするために作成されたこのテクニカル レポートは、ISO/TS 17450-2 に準拠する必要があることは認識されていますが、このプレゼンテーションの発行時点では、可能な唯一の実用的なものでした。
Introduction
This Technical Report is a geometrical product specification (GPS) document and is to be regarded as a global GPS document (see ISO/TR 14638). It influences chain links 4, 5 and 6 of the chains of standards.
For more detailed information on the relationship of this Technical Report to other standards and to the GPS matrix model, see Annex C.
Uncertainty in temperature measurement and measurement at other than the standard reference temperature lead to uncertainty in the length measurement results. In addition, measurements at other than the standard reference temperature leads to systematic error in the measurement result.
The principle addressed by this Technical Report is that most materials expand or contract when their temperatures are changed. If the temperature at which the measurement is made is the standard reference temperature, the nominal thermal expansion is zero but uncertainty in the measurement of temperature leads to uncertainty in the measurement result. If length measurements are made at temperatures other than the standard reference temperature, there will be a resulting differential thermal expansion. This can arise both when the measuring instrument is adjusted, as by comparison with a working standard, and when it is used to measure the workpiece.
If the temperatures and the response to thermal changes of the workpiece, the working standard, and the measuring instrument are known, a correction can be made for differential thermal expansion. It is impossible to know exactly either the temperatures or the response; thus, there will be an uncertainty in the correction and in the measurement result. This Technical Report shows how to calculate the relevant systematic error and evaluate the thermal contribution to the measurement uncertainty.
The resulting standard uncertainty component due to thermal effects shall be combined in the usual manner (see GUM) in order to evaluate the combined standard uncertainty for a measurement.
When necessary, an appropriate decision rule (e.g. an acceptable fraction of workpiece tolerance or that embodied in ISO 14253-1) can be invoked so that the consequence of the thermally-induced dimensional uncertainty on workpiece conformance decisions can be determined.
ISO/TR 16015 is developed in support of ISO 1.
It is recognized that this Technical Report, developed in support of ISO 1, will have to be brought in line with ISO/TS 17450-2, but at the time of publication this presentation was the only practical one possible.