この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
ISO/TS 11155 のこの部分では、粒子サイズが 0.3 µm を超えるラボ用テスト装置でのフィルター要素の一貫した評価のために、装置の重要な特性、テスト手順、レポート形式を含む微粒子濾過テストを規定しています。自動車の客室やキャビンの換気に使用される外気または再循環空気から粒子状物質を除去するためのフィルターに適用できます。
ISO/TS 11155 のこの部分で指定されているテストにより、標準化された実験室の微粒子課題に対する圧力損失、分別ろ過効率、および加速された微粒子保持能力についてフィルターエレメントの評価が可能になります。このテスト方法では、考えられるあらゆる微粒子の問題や環境への影響が除外されているため、フィルターの相対的なランクは使用中に変わる可能性があります。
注 1絶対的な比較は、同じ形状とサイズ、およびテストダクト内の同じ位置のフィルタエレメントでのみ可能です。
注 2供給者と顧客の間の合意を条件として、試験手順では品質管理を目的とした単一パラメータとして重量効率を計算することができます。重量効率テストについては、ISO 5011 を参照してください。
1 Scope
This part of ISO/TS 11155 specifies a particulate filtration test, including the critical characteristics of equipment, test procedure and report format, for the consistent assessment of filter elements in a laboratory test rig with particle sizes larger than 0,3 µm. It is applicable to filters for removing particulate matter from external or recirculated air used for ventilating motor vehicle passenger compartments or cabins.
The test specified in this part of ISO/TS 11155 enables an assessment of filter elements for pressure loss, fractional filtration efficiency and accelerated particulate holding capability against standardized laboratory particulate challenges. Because the test methods exclude the full range of possible particulate challenges and environmental effects, the relative ranking of filters may change in service.
NOTE 1 Absolute comparability is only possible with filter elements of the same shape and size as well as the same position in the test duct.
NOTE 2 Subject to agreement between supplier and the customer, the test procedure allows for the calculation of gravimetric efficiency as a single parameter for quality control purposes. For gravimetric efficiency tests refer to ISO 5011.