この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
他の状況では、特にそのような文書に対する緊急の市場要求がある場合、技術委員会は他のタイプの規範文書を公開することを決定する場合があります。
- ISO 公開仕様 (ISO/PAS) は、ISO ワーキング グループの技術専門家間の合意を表し、親委員会のメンバーの 50% を超える投票によって承認された場合に公開が承認されます。
- ISO 技術仕様 (ISO/TS) は、技術委員会のメンバー間の合意を表しており、委員会のメンバーの 2/3 の投票によって承認された場合に、公開が承認されます。
ISO/PAS または ISO/TS は、さらに 3 年間確認されるか、国際規格になるように改訂されるか、または撤回されるかを決定するために、3 年後にレビューされます。 ISO/PASまたはISO/TSが確認された場合、さらに3年後に再度レビューされ、その時点で国際規格に変換されるか、撤回される必要があります。
ISO/TS 11999-2 は、技術委員会 ISO/TC 94, 個人の安全 – 保護服および保護具、小委員会 SC 14, 消防士の個人装備によって作成されました。
ISO 11999 は、次の部分で構成されており、一般的な名称は消防士用 PPE — 構造物で発生する火災との闘い中に高レベルの熱および/または炎にさらされるリスクがある消防士が使用する PPE の試験方法と要件:
- Part 1: 一般
- Part 2: 互換性
- Part 3: 衣類
- Part 4: 手袋
次の部分は準備中です。
- Part 5: ヘルメット
- Part 6: 履物
- Part 7: 顔と目の保護
- Part 8: ヒアリング
- Part 9: ファイアフッド
- Part 10: 呼吸保護
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
In other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publish other types of normative document:
- an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote;
- an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting a vote.
An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an International Standard or be withdrawn.
ISO/TS 11999-2 was prepared by Technical Committee ISO/TC 94, Personal safety – Protective clothing and equipment, Subcommittee SC 14, Fire-fighters' personal equipment.
ISO 11999 consists of the following parts, under the general title PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures:
- Part 1: General
- Part 2: Compatibility
- Part 3: Clothing
- Part 4: Gloves
The following parts are under preparation:
- Part 5: Helmets
- Part 6: Footwear
- Part 7: Face and eye protection
- Part 8: Hearing
- Part 9: Firehoods
- Part 10: Respiratory protection