この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語と定義
この文書の目的には、ISO 10360-1, VIM, および GUM で与えられる用語と定義が適用されます。
参考文献
| 1 | ISO 1:2002, 幾何製品仕様 (GPS) — 幾何製品仕様および検証用の標準基準温度 |
| 2 | ISO 9000, 品質マネジメントシステム - 基礎と用語 |
| 3 | ISO 1101:2004, 幾何製品仕様 (GPS) — 幾何公差 — 形状、方向、位置、および振れの公差 |
| 4 | ISO 10360-2:2001 2) 、幾何製品仕様書 (GPS) — 座標測定機 (CMM) の受け入れおよび再検証テスト — Part 2: サイズの測定に使用される CMM |
| 5 | ISO 10360-3:2000, 幾何製品仕様書 (GPS) — 三次元測定機 (CMM) の受け入れおよび再検証テスト — Part 3: 4 番目の軸として回転テーブルの軸を備えた CMM |
| 6 | ISO 10360-4:2000, 幾何製品仕様書 (GPS) — 座標測定機 (CMM) の受け入れおよび再検証テスト — Part 4: スキャン測定モードで使用される CMM |
| 7 | ISO 10360-5:2000 3) 、幾何製品仕様書 (GPS) — 三次元測定機 (CMM) の受け入れおよび再検証テスト — Part 5: マルチスタイラス プロービング システムを使用する CMM |
| 8 | ISO 14253-1:1998, 幾何製品仕様書 (GPS) — ワークピースおよび測定機器の測定による検査 — Part 1: 仕様への適合または不適合を証明するための決定ルール |
| 9 | ISO/TR 14638:1995, 幾何製品仕様書 (GPS) — マスタープラン |
| 10 | ISO/IEC Guide 98-3/補足1 4) 、測定の不確かさ — Part 3: 測定における不確実性の表現に関するガイド (GUM:1995) — 補足 1: モンテカルロ法を使用した分布の伝播 |
3 Terms and definitions
For the purpose of this document, the terms and definitions given in ISO 10360-1, VIM and GUM apply.
Bibliography
| 1 | ISO 1:2002, Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verification |
| 2 | ISO 9000, Quality management systems — Fundamentals and vocabulary |
| 3 | ISO 1101:2004, Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| 4 | ISO 10360-2:2001 2) , Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 2: CMMs used for measuring size |
| 5 | ISO 10360-3:2000, Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 3: CMMs with the axis of a rotary table as the fourth axis |
| 6 | ISO 10360-4:2000, Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 4: CMMs used in scanning measuring mode |
| 7 | ISO 10360-5:2000 3) , Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 5: CMMs using multiple-stylus probing systems |
| 8 | ISO 14253-1:1998, Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformance or non-conformance with specifications |
| 9 | ISO/TR 14638:1995, Geometrical Product Specifications (GPS) — Masterplan |
| 10 | ISO/IEC Guide 98-3/Suppl. 1 4) , Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) — Supplement 1: Propagation of distributions using a Monte Carlo method |