この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
このドキュメントでは、次の条件が満たされる状況where測定の不確かさを決定するための実験手順と統計分析を指定します。
| 条件 1: | 測定量のレベルは負ではありません。たとえば、サンプル中の汚染物質の濃度レベルです。 |
| 条件 2: | 測定誤差は、2 つの独立した成分で構成されます。これらの成分の 1 つは相対標準偏差が一定であり (つまり、絶対偏差は測定量のレベルに比例します)、もう 1 つの成分は絶対標準偏差が一定です (つまり、絶対偏差は測定量のレベルに比例します) 、測定量のレベルとは無関係) |
| 条件 3: | さまざまなレベルの測定量のサンプルを利用できるようにすることができます。測定量のレベルが化学物質の濃度である場合、サンプルは、たとえばブランクサンプルを強化 (スパイク) することによって取得できます。 |
条件 1 と 2 は、機器による化学分析のほとんどのアプリケーションで満たされます。条件 3 は、ブランク サンプルが利用可能な場合、化学分析で満たすことができます。
このドキュメントは、一定期間にわたる、同じレベルの測定量で、さまざまな技術者、さまざまな環境条件、同じまたは類似のテスト項目の特定のラボの正確なデータを決定するためにも使用できます。
1 Scope
This document specifies experimental procedures and statistical analysis for the determination of measurement uncertainty in situations where the following conditions are fulfilled:
| Condition 1: | The level of the measurand is non-negative, e.g. concentration level of a contaminant in a sample. |
| Condition 2: | Measurement error consists of two independent components: for one of these components the relative standard deviation is constant (that is, the absolute deviation is proportional to the level of the measurand), whereas for the other component the absolute standard deviation is constant (that is, independent of the level of the measurand). |
| Condition 3: | Samples for different levels of the measurand can be made available; if the level of the measurand is the concentration of a chemical substance, samples could be obtained e.g. by fortifying (spiking) blank samples. |
Conditions 1 and 2 are met for most applications of instrumental chemical analyses. Condition 3 can be met for chemical analyses if blank samples are available.
This document can also be used to determine precision data for a particular laboratory for different technicians, different environmental conditions, the same or similar test items, with the same level of the measurand, over a certain period of time.