ISO/TS 8062-2:2013 幾何学的製品仕様（GPS）—成形部品の寸法および幾何公差—パート2：ルール | ページ 6

3.1

moulded feature

<of a moulded part> feature which has not been machined on a moulded part

3.2

intermediate machined feature

<of a moulded part> feature of a moulded part which has undergone machining and which subsequently will be machined to its final condition

Note 1 to entry: An intermediate machined feature is typically a roughly machined moulded feature (3.1) .

Note 2 to entry: An intermediate machined feature can be used as a datum for subsequent machining of the moulded part.

3.3

final machined feature

<of a moulded part> feature of a moulded part which has been machined to its final condition

3.4

final moulded part

moulded part after fettling (if any)

Note 1 to entry: A final moulded part only consists of features which are moulded and have not been finished except by fettling.

3.5

intermediate machined moulded part

moulded part which has undergone some machining and which subsequently will be machined further

Note 1 to entry: An intermediate machined moulded part consists of at least one moulded feature (3.1) to be subsequently machined or at least one intermediate machined feature (3.2) . In addition, it consists of moulded features not to be machined (if any) and final machined features (3.3) (if any).

Note 2 to entry: An intermediate machined moulded part can be produced from a final moulded part or from another intermediate machined moulded part.

3.6

final machined moulded part

moulded part which has been machined to its final condition

Note 1 to entry: A final machined moulded part consists of final machined features (3.3) and can include moulded features (3.1) not to be machined. A final machined moulded part cannot include intermediate machined moulded features.

Note 2 to entry: A final machined moulded part can be produced from a final moulded part (3.4) or from an intermediate machined moulded part (3.5) .

3.7

moulded-part condition

manufacturing stage of a moulded part

Note 1 to entry: Listed in chronological order of manufacturing, a moulded part can be in a final moulded-part (3.4) condition, intermediate machined moulded-part (3.5) condition or final machined moulded-part (3.6) condition.

Note 2 to entry: Only one final moulded-part condition exists.

Note 3 to entry: Various intermediate machined moulded-part conditions can exist.

Note 4 to entry: Only one final machined moulded-part condition can exist.

Note 5 to entry: A moulded part does not need to exist in an intermediate machined moulded-part condition before the final machined moulded-part condition.

Note 6 to entry: Heat treatment or straightening (correction of unintended distortion) can be carried out in any moulded-part condition.

3.8

single drawing

<of a moulded part> drawing of a moulded part giving requirements for one moulded-part condition only

3.9

combined drawing

<of a moulded part> drawing of a moulded part giving requirements for more than one moulded-part condition