JIS C 1400-2:2020 風力発電システム―第２部：小形風車 | ページ 25

                                                                                            117
                                                                C 1400-2 : 2020 (IEC 61400-2 : 2013)
                                          参考文献
     IEC 60034 (all parts),Rotating electrical machines
     IEC 60034-1,Rotating electrical machines−Part 1: Rating and performance
     IEC 60034-2 (all parts),Rotating electrical machines−Part 2: Specific methods for determining separate losses
        of large machines from tests
     IEC 60034-5,Rotating electrical machines−Part 5: Degrees of protection provided by the integral design of
        rotating electrical machines (IP code)−Classification
     IEC 60034-8,Rotating electrical machines−Part 8: Terminal markings and direction of rotation
     IEC 60364 (all parts),Low-voltage electrical installations
     IEC 60529:1989,Degrees of protection provided by enclosures (IP Code)
     JIS C 1400-0 風力発電システム−第0部 : 風力発電用語
     JIS C 1400-1:2010 風車−第1部 : 設計要件
      注記 対応国際規格 : IEC 61400-1:2005,Wind turbines−Part 1: Design requirements
     IEC 61400-4,Wind turbines−Part 4: Design requirements for wind turbine gearboxes
     IEC 61400-21:2008,Wind turbines−Part 21: Measurement and assessment of power quality characteristics of
        grid connected wind turbines
     JIS C 1400-22:2014 風車−第22部 : 風車の適合性試験及び認証
      注記 対応国際規格 : IEC 61400-22:2010,Wind turbines−Part 22: Conformity testing and certification
     JIS C 1400-24:2014 風車−第24部 : 雷保護
      注記 対応国際規格 : IEC 61400-24,Wind turbines−Part 24: Lightning protection
     ISO/IEC 17020:2012,Conformity assessment−Requirements for the operation of various types of bodies
        performing inspection
     JIS Q 9000(シリーズ) 品質マネジメントシステム
      注記 対応国際規格 : ISO 9000 (all parts),Quality management and quality assurance standards
     JIS Z 8101-1:2015 統計−用語及び記号−第1部 : 一般統計用語及び確率で用いられる用語
     JIS Q 9001:2015 品質マネジメントシステム−要求事項
      注記 対応国際規格 : ISO 9001:2008,Quality management systems−Requirements
     ECN-C-96-033,Verification of design loads for small wind turbines, F.J.L. Van Hulle et al.
     AIAA 2003-1048,Investigation of the IEC safety standard for small wind turbine design through modelling and
        testing,Jason Jonkman et al.
     AGMA/AWEA 921-A97,Recommended practices for design and specification of gearboxes for wind turbine
        generator systems
     Expert group study on recommended practices for wind turbine testing,9. Lightning protection for wind turbine
        installations,IEA, 1997
     EN 1993, Eurocode 3,Design of steel structures
     Hobbacher,Fatigue Design of Welded Joints and Components,International Institute of Welding (IIW),Doc.
        IIW-1823-07 ex XIII-2151r4-07/XV-1254r4-07, 2008
     Germanischer Lloyd Industrial Services GmbH,Renewables Certification, Guideline for the Certification of

――――― [JIS C 1400-2 pdf 121] ―――――

118
C 1400-2 : 2020 (IEC 61400-2 : 2013)
        Wind Turbines,Edition 2010
     DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17,May 2006
        on machinery, and amending Directive 95/16/EC (recast)
     DIRECTIVE 2006/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12,December
        2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use
        within certain voltage limits