この規格ページの目次
2
C 8201-5-1 : 2007 (IEC 60947-5-1 : 2003)
− 過負荷リレーの制御回路接点
接触器形リレーは,この規格で満足しなければならない使用負荷種別以外に,JIS C 8201-4-1の要求事
項及び試験も満足しなければならない。
この規格は,JIS C 4523が適用するリレー,又は家庭用及び類似目的の自動電気制御機器を含まない。
表示灯,押ボタンなどの色の要求事項は,IEC 60073及び国際照明委員会 (CIE) のPub.2に規定してい
る。
この規格は,次の事項について規定する。
a) 制御回路機器の特性
b) 次の事項に関する電気的及び機械的要求事項
1) 実行しなければならない種々の責務
2) 定格特性及び表示の意味
3) 定格特性を検定するための試験
c) 次の事項に関し,制御回路機器によって満足しなければならない機能上の要求事項
1) 環境条件,箱入り機器の外囲条件を含む
2) 耐電圧性能
3) 端子
注記 この規格の対応国際規格及びその対応の程度を表す記号を,次に示す。
IEC 60947-5-1:2003,Low-voltage switchgear and controlgear−Part 5-1: Control circuit devices and
switching elements−Electromechanical control circuit devices(IDT)
なお,対応の程度を表す記号 (IDT) は,ISO/IEC Guide 21に基づき,一致していることを示
す。
1.2 引用規格
次に掲げる規格は,この規格に引用されることによって,この規格の規定の一部を構成する。
これらの引用規格のうちで,西暦年を付記してあるものは,記載の年の版を適用し,その後の改正版(追
補を含む。)には適用しない。西暦年の付記がない引用規格は,その最新版(追補を含む。)を適用する。
JIS C 0025:1988 環境試験方法(電気・電子)温度変化試験方法
注記 対応国際規格 : IEC 60068-2-14:1984,Environmental testing−Part 2: Tests−Test N: Change of
temperature(MOD)
JIS C 0617-7 電気用図記号 第7部 : 開閉装置,制御装置及び保護装置
注記 対応国際規格 : IEC 60617,Graphical symbols for diagrams(IDT)
JIS C 4523 制御用リードリレー
JIS C 8201-1 低圧開閉装置及び制御装置−第1部 : 通則
注記 対応国際規格 : IEC 60947-1:2004,Low-voltage switchgear and controlgear−Part 1: General rules
(MOD)
JIS C 8201-4-1 低圧開閉装置及び制御装置−第4部 : 接触器及びモータスタータ−第1節 : 電気機械
式接触器及びモータスタータ
注記 対応国際規格 : IEC 60947-4-1:2000,Low-voltage switchgear and controlgear−Part 4-1: Contactors
and motor-starters−Electromechanical contactors and motor-starters及びAmendment 1 (2002)
(MOD)
――――― [JIS C 8201-5-1 pdf 6] ―――――
3
C 8201-5-1 : 2007 (IEC 60947-5-1 : 2003)
JIS C 60068-2-6 環境試験方法−電気・電子−正弦波振動試験方法
注記 対応国際規格 : IEC 60068-2-6:1995,Environmental testing−Part 2: Tests−Test Fc: Vibration
(sinusoidal)(IDT)
JIS C 60068-2-27 環境試験方法−電気・電子−衝撃試験方法
注記 対応国際規格 : IEC 60068-2-27:1987,Environmental testing−Part 2: Tests−Test Ea and guidance:
Shock(IDT)
JIS C 60068-2-30 環境試験方法(電気・電子)温湿度サイクル(12+12時間サイクル)試験方法
注記 対応国際規格 : IEC 60068-2-30:1980,Environmental testing−Part 2: Tests−Test Db and guidance:
Damp heat, cyclic (12+12 hour cycle)(IDT)
JIS C 61000-4-2 電磁両立性−第4部 : 試験及び測定技術−第2節 : 静電気放電イミュニティ試験
注記 対応国際規格 : IEC 61000-4-2:1995,Electromagnetic compatibility (EMC)−Part 4-2: Testing and
measurement techniques−Electrostatic discharge immunity test(IDT)
JIS C 61000-4-3 電磁両立性−第4-3部 : 試験及び測定技術−放射無線周波電磁界イミュニティ試験
注記 対応国際規格 : IEC 61000-4-3:2002,Electromagnetic compatibility (EMC)−Part 4-3: Testing and
measurement techniques−Radiated, radio-frequency, electromagnetic field immunity test(IDT)
JIS C 61000-4-4 電磁両立性−第4-4部 : 試験及び測定技術−電気的ファストトランジェント/バー
ストイミュニティ試験
注記 対応国際規格 : IEC 61000-4-4:2004,Electromagnetic compatibility (EMC)−Part 4-4: Testing and
measurement techniques−Electrical fast transient/burst immunity test(IDT)
JIS C 61000-4-5 電磁両立性−第4部 : 試験及び測定技術−第5節 : サージイミュニティ試験
注記 対応国際規格 : IEC 61000-4-5:1995,Electromagnetic compatibility (EMC)−Part 4-5: Testing and
measurement techniques−Surge immunity tests(MOD)
JIS C 61000-4-6 電磁両立性−第4-6部 : 試験及び測定技術−無線周波電磁界によって誘導する伝導
妨害に対するイミュニティ
注記 対応国際規格 : IEC 61000-4-6:1996,Electromagnetic compatibility (EMC)−Part 4-6: Testing and
measurement techniques−Immunity to conducted disturbances,induced by radio-frequency fields
(MOD)
JIS C 61000-4-8 電磁両立性−第4部 : 試験及び測定技術−第8節 : 電源周波数磁界イミュニティ試
験
注記 対応国際規格 : IEC 61000-4-8:1993,Electromagnetic compatibility (EMC)−Part 4: Testing and
measurement techniques−Section 8: Power frequency magnetic field immunity test. Basic EMC
Publication(MOD)
JIS C 61000-4-11 電磁両立性−第4部 : 試験及び測定技術−第11節 : 電圧ディップ,短時間停電及
び電圧変化に対するイミュニティ試験
注記 対応国際規格 : IEC 61000-4-11:1994,Electromagnetic compatibility (EMC)−Part 4: Testing and
measuring techniques−Section 11: Voltage dips,short interruptions and voltage variations immunity
tests及びAmendment 1:2000(MOD)
IEC 60050 (441),International Electrotechnical Vocabulary (IEV)−Chapter 441: Switchgear, controlgear and
fuses (IEV 441)
IEC 60050 (446),International Electrotechnical Vocabulary (IEV)−Chapter 446: Electrical relays (IEV 446)
――――― [JIS C 8201-5-1 pdf 7] ―――――
4
C 8201-5-1 : 2007 (IEC 60947-5-1 : 2003)
IEC 60073:2002,Basic and safety principles for man-machine interface,marking and identification−Coding
principles for indicators and actuators
IEC 60112:2003,Method for the determination of the proof and the comparative tracking indices of solid
insulating materials
IEC 61000-4-13:2002,Electromagnetic compatibility (EMC)−Part 4-13: Testing and measurement techniques
−Harmonics and interharmonics including mains signalling at a.c.power port, low frequency immunity
tests
IEC 61140:2001,Protection against electric shock−Common aspects for installation and equipment
CISPR 11:1997,Industrial, scientific and medical (ISM) adio-frequency equipment−Electromagnetic
disturbance characteristics−Limits and methods of measurement
2 用語及び定義
この規格で用いる主な用語及び定義は,JIS C 8201-1の箇条2(用語及び定義)によるほか,次による。
ただし,定義の五十音順の索引は,アルファベット順から五十音順に変更した。
定義の五十音順索引
e-遅延(接点素子の)[e-delay (of a contact element) ] 2.4.1.1
位置決め機構(ロータリスイッチの)[locating mechanism (of a rotary switch) ] 2.3.5
位置検出スイッチ [position switch] 2.2.1.3
ウォッブルスティックスイッチ [wobble stick] 2.2.2.20
動き制限ロータリスイッチ [limited movement rotary switch] 2.2.2.17
エンドストップ [end stop] 2.3.6
応差の値 [differential value] 2.4.2.4
押し引きボタンスイッチ [push-pull button] 2.2.2.3
押しボタンスイッチ [push-button] 2.2.2.1
回転可能押しボタンスイッチ [free push-button] 2.2.2.13
回転制限押しボタンスイッチ [guided push-button] 2.2.2.14
開閉素子 [switching element] 2.3.1
かぎ操作ロータリスイッチ [key-operated rotary switch] 2.2.2.16
かぎ付き押しボタンスイッチ [key-operated push-button] 2.2.2.7
ガード付き押しボタンスイッチ [shrouded push-button] 2.2.2.12
ガード付きボタン [recessed button] 2.3.4.2
カバー付き押しボタンスイッチ [covered push-button] 2.2.2.11
可変遅延(接点素子の)[adjustable delay (of a contact element) ] 2.4.1.4
間接(スナップ)動作接点素子 [independent (snap) ction contact element] 2.3.3.8
きのこボタン [mushroom button] 2.3.4.4
強制駆動 [positive drive] 2.4.4.4
切換接点素子 [change-over contact elements] 2.3.3.5
限時押しボタンスイッチ [delayed action push-button] 2.2.2.9
固定遅延(接点素子の)[fixed delay (of a contact element) ] 2.4.1.3
最小起動力(又はモーメント)[minimum starting force (or moment) ] 2.4.4.6
――――― [JIS C 8201-5-1 pdf 8] ―――――
5
C 8201-5-1 : 2007 (IEC 60947-5-1 : 2003)
最小駆動力(又はモーメント)[minimum actuating force (or moment) ] 2.4.4.7
時延押しボタンスイッチ [time-delay push-button] 2.2.2.8
時延接触器形リレー [time-delay contactor relay] 2.2.1.2
遮断接点素子(常閉)[break-contact element (normally closed) ] 2.3.3.4
瞬時接触器形リレー [instantaneous contactor relay] 2.2.1.1
照光押しボタンスイッチ [illuminated push-button] 2.2.2.10
シングルギャップ接点素子 [single gap contact element] 2.3.3.1
制御回路機器 [control circuit device] 2.1.1
2.1.2
制御スイッチ(制御回路及び補助回路用)[control switch (for control and auxiliary circuits) ]
制御盤 [control station] 2.1.4
制限駆動 [limited drive] 2.4.4.5
静止位置 [position of rest] 2.4.3.2
接点素子(制御スイッチの)[contact element (of a control switch) ] 2.3.3
接点素子の動作後の動き [over-travel of the contact element] 2.4.4.9
接点素子の動作までの動き [pre-travel of the contact element] 2.4.4.8
接点ユニット [contact unit] 2.3.3.10
操作ダイアグラム [operating diagram] 2.4.3.7
操作量 [actuating quantity] 2.4.2.1
ダブルギャップ接点素子 [double gap contact element] 2.3.3.2
多方向スイッチ [joy stick] 2.2.2.19
単方向性ロータリスイッチ [unidirectional movement rotary switch] 2.2.2.18
2.1.3
断路(アイソレーション)に適する制御スイッチ [control switch suitable for isolation]
直接駆動 [direct drive] 2.4.4.3
直接動作接点素子 [dependent action contact element] 2.3.3.9
通過位置 [transit position] 2.4.3.3
2.4.3.1
定位置(略語 : 位置)(ロータリスイッチの)[definite position (abbreviation: position)
(of a rotary switch) ]
d-遅延(接点素子の)[d-delay (of a contact element) ] 2.4.1.2
電気的に分離した接点素子 [electrically separated contact elements] 2.3.3.7
動作後の動き(操作部の)[over-travel of the actuator] 2.4.4.2
動作値 [operating value] 2.4.2.2
動作までの動き(操作部の)[pre-travel of the actuator] 2.4.4.1
投入接点素子(常開)[make-contact element normally open] 2.3.3.3
突形ボタン [extended button] 2.3.4.3
バイアス位置 [biased position] 2.4.3.4
バウンスタイム [bounce time] 2.4.4.10
パルス(瞬時)接点素子 [pulse (fleeting) ontact element] 2.3.3.6
半導体素子 [semiconductor element] 2.3.2
引きボタンスイッチ [pull-button] 2.2.2.2
平形ボタン [flush-button] 2.3.4.1
――――― [JIS C 8201-5-1 pdf 9] ―――――
6
C 8201-5-1 : 2007 (IEC 60947-5-1 : 2003)
復帰値 [return value] 2.4.2.3
フットスイッチ(ペダル)[foot switch (pedal) ] 2.2.2.21
プログラマ [programmer] 2.2.1.4
ボタン [button] 2.3.4
ラッチする位置 [latched position] 2.4.3.5
ラッチ付き押しボタンスイッチ [latched push-button] 2.2.2.5
ロータリ制御スイッチ(略語 : ロータリスイッチ)[rotary control switch] 2.2.2.15
ロータリボタンスイッチ(例えば,セレクタスイッチ)[rotary button (e.g.: selector switch) ] 2.2.2.4
ロックする位置 [locked position] 2.4.3.6
ロック付き押しボタンスイッチ [locked push-button] 2.2.2.6
2.1 基本定義
2.1.1
制御回路機器 (control circuit device)
開閉装置及び制御装置の,制御,信号,インターロックなど目的とした電気機器。
注記 制御回路機器は,計器,ポテンショメータ,リレーなど,他の規格で取り扱う附属機器が,前
記に規定している目的のために使用されている限りにおいて,これを含むものとする。
2.1.2
制御スイッチ(制御回路及び補助回路用)[control switch (for control and auxiliary circuits) ]
信号,インターロックなどを含み,開閉装置及び制御装置の作動を制御する目的に役立つ機械的開閉装
置。
注記1 制御スイッチは,操作部を備えていて,1個又は複数の接点素子を含む。
注記2 制御スイッチは,半導体素子又は接点素子を含むことがあるので(2.3.2及び2.3.3参照),こ
の定義は,IEV 441-14-46とは異なる。
2.1.3
断路(アイソレーション)に適する制御スイッチ (control switch suitable for isolation)
遮断の状態で規定する断路(アイソレーション)機能を満足する制御スイッチ[JIS C 8201-1の2.1.19
及びJIS C 8201-1の7.2.3.1 1) )参照]。
注記 前記の制御スイッチは,機器が制御動作中に作業員に対し,より高い安全度を提供することを
目的とする。したがって,接点が十分に開いていない場合など操作に失敗した場合には,これ
に対処するため,よく訓練された人が十分注意して手動で操作する。
2.1.4
制御盤 (control station)
1個以上の制御スイッチが同一のパネル上に固定され,又は同じエンクロージャに位置しているアセン
ブリ (IEV 441-12-08)。
注記 制御盤又はエンクロージャは,更に関連機器,例えば,ポテンショメータ,信号灯,計器など
を含んでもよい。
2.2 制御スイッチ
(control switches)
2.2.1
自動制御スイッチ (automatic control switches)
注記 自動制御スイッチは,自動制御(JIS C 8201-1の2.4.5参照)によって操作する。これらのスイ
――――― [JIS C 8201-5-1 pdf 10] ―――――
次のページ PDF 11
JIS C 8201-5-1:2007の引用国際規格 ISO 一覧
- IEC 60947-5-1:2003(IDT)
JIS C 8201-5-1:2007の国際規格 ICS 分類一覧
- 29 : 電気工学 > 29.130 : 開閉装置及び制御装置 > 29.130.20 : 低電圧開閉用及び制御装置
JIS C 8201-5-1:2007の関連規格と引用規格一覧
- 規格番号
- 規格名称
- JISC0617-7:2011
- 電気用図記号―第7部:開閉装置,制御装置及び保護装置
- JISC4523:2018
- 制御用リードリレー
- JISC4540-1:2010
- 電磁式エレメンタリ リレー―第1部:一般要求事項
- JISC60068-2-27:2011
- 環境試験方法―電気・電子―第2-27部:衝撃試験方法(試験記号:Ea)
- JISC60068-2-6:2010
- 環境試験方法―電気・電子―第2-6部:正弦波振動試験方法(試験記号:Fc)
- JISC61000-4-2:2012
- 電磁両立性―第4-2部:試験及び測定技術―静電気放電イミュニティ試験
- JISC61000-4-4:2015
- 電磁両立性―第4-4部:試験及び測定技術―電気的ファストトランジェント/バーストイミュニティ試験
- JISC61000-4-8:2016
- 電磁両立性―第4-8部:試験及び測定技術―電源周波数磁界イミュニティ試験
- JISC8201-4-1:2020
- 低圧開閉装置及び制御装置―第4-1部:接触器及びモータスタータ:電気機械式接触器及びモータスタータ
- JISC8201-5-5:2008
- 低圧開閉装置及び制御装置―第5部:制御回路機器及び開閉素子―第5節:機械的ラッチング機能をもつ電気的非常停止機器