この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語、定義、記号、単位
3.1 用語と定義
このドキュメントの目的のために、ISO 7345 および以下に記載されている用語と定義が適用されます。
3.1.1
宣言された熱価
温度と湿度の参照条件で測定されたデータから評価された建築材料または製品の熱特性の期待値で、規定された割合と信頼レベルに対して与えられ、通常の条件下での合理的な期待耐用年数に対応する
3.1.2
設計熱価
設計熱伝導率または設計熱抵抗
注記 1 製品は、異なる用途または環境条件に対して、複数の設計値を持つことができます。
3.1.3
設計熱伝導率
特定の外部および内部条件下での建築材料または製品の熱伝導率の値。これは、建築コンポーネントに組み込まれた場合の材料または製品の典型的な性能と見なすことができます。
3.1.4
設計熱抵抗
特定の外部および内部条件下での建築製品の熱抵抗の値。これは、建築コンポーネントに組み込まれた場合のその製品の典型的な性能と見なすことができます。
3.1.5
材料
納入形態、形状、および寸法に関係なく、外装またはコーティングのない製品の一部。
3.1.6
製品
所定の形状と寸法を持ち、表面仕上げやコーティングを含む、すぐに使用できる材料の最終形態。
3.2 記号と単位
| シンボル | 量 | ユニット |
|---|---|---|
| c p | 定圧比熱容量 | J/(kg・K) |
| F a | 経年換算係数 | — |
| F m | 水分換算係数 | — |
| F T | 温度換算係数 | — |
| f T | 温度換算係数 | K −1 |
| f u | 水分換算係数 質量単位a | キロ/キロ |
| f y | 体積による水分換算係数a | 立方メートル/立方メートル |
| R | 熱抵抗 | m 2 ·K/W |
| s d | 水蒸気拡散換算空気層厚 | m |
| T | 熱力学的温度 | K |
| u | 含水率質量 | キロ/キロ |
| λ | 熱伝導率 | W/(m・K) |
| µ | 耐水蒸気係数 | — |
| ρ | 密度 | kg/ m3 |
| Ψ | 体積ごとの水分含有量 | 立方メートル/立方メートル |
参考文献
| 1 | ISO 2602, テスト結果の統計的解釈 — 平均値の推定 — 信頼区間 |
| 2 | ISO 2854, データの統計的解釈 - 平均と分散に関連する推定と検定の技法 |
| 3 | ISO 8301, 断熱 — 定常熱抵抗および関連特性の決定 — 熱流量計装置 |
| 4 | ISO 8302, 断熱 — 定常状態の熱抵抗および関連特性の決定 — 保護されたホット プレート装置 |
| 5 | ISO 9053, 音響 - 音響用途の材料 - 気流抵抗の測定 |
| 6 | ISO 9346, 建築物および建築材料の温熱性能 - 物質移動の物理量 - 語彙 |
| 7 | ISO 10292, 建物のガラス — 複層ガラスの定常状態 U 値 (熱透過率) の計算 |
| 8 | ISO 16269-6:2005, データの統計的解釈 — Part 6: 統計的許容範囲の決定 |
| 9 | EN 1745, 石材および石材製品 - 設計熱値の決定方法 |
| 10 | EN 10088-1, ステンレス鋼 — Part 1: ステンレス鋼のリスト |
| 11 | EN 12524, 建築材料および製品 — 吸湿熱特性 — 表にされた設計値 |
| 12 | EN 12664, 建築材料および製品の熱性能 — 保護されたホット プレートおよび熱流計法による熱抵抗の測定 — 中および低熱抵抗の乾燥および湿潤製品 |
| 13 | EN 12667, 建材および製品の熱性能 — 保護されたホット プレートおよび熱流計法による熱抵抗の測定 — 高および中熱抵抗の製品 |
| 14 | EN 12939, 建築材料および製品の熱性能 — 保護されたホット プレートおよび熱流計法による熱抵抗の測定 — 高および中熱抵抗の厚い製品 |
| 15 | Anderson , BR et al .,調和のとれた設計値の作成のための建材の熱特性の分析、選択および統計処理。英国のBuilding Research Establishment (BRE)が調整するThermal Values Groupの最終報告書 |
| 16 | Campanale , M.、保護されたホット プレートまたは熱流量計による厚い試験片の熱抵抗の測定。 Istituto di Fisica Tecnica, Università di Padova, パドヴァ、イタリア |
| 17 | Campanale 、M.およびD e Ponte 、F.、絶縁材料の定常状態の熱伝達特性に対する温度の影響。 Istituto di Fisica Tecnica, Università di Padova, パドヴァ、イタリア |
| 18 | Bisiol 、B.、 Campanale 、M.およびMoro 、L.、断熱コルクボードの理論的および実験的特性評価。 Istituto de Fisica Tecnica, Facoltà di Ingegneria, Università di Padova, パドヴァ, イタリア |
| 19 | Campanale 、M.、 e Ponte 、F.、 Moro 、L.およびZardo 、V.、ポリウレタンの熱伝達における放射寄与の分離。 Istituto de Fisica Tecnica, Università di Padova, パドヴァ、イタリア |
| 20 | Campanale 、M.、 e Ponte 、F.およびMoro 、L.均質な細胞プラスチック材料の理論的特性。 Istituto de Fisica Tecnica, Facoltà di Ingegneria, Università di Padova, パドヴァ, イタリア |
| 21 | e Ponte , F., High Temperatures — High Pressures , Vol. 19 , 1987, pp. 237-249, 断熱材における複合放射および伝導熱伝達。 10 ETPC議事録、 349 |
| 22 | クマラン、MK, IEA 附属書 24, 断熱エンベロープ部品における熱、空気、湿気の移動、第 3 巻、タスク 3: 材料特性。 Per Jostein Hovdeによるレビュー。ファティン・アリ・モハメドが編集。最終報告。 Leuven: Laboratorium Bouwfysica, Departement Burgerlijke Bouwkunde, 1996 年、ISBN 90-75741-01-4 |
3 Terms, definitions, symbols and units
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 7345 and the following apply.
3.1.1
declared thermal value
expected value of a thermal property of a building material or product assessed from measured data at reference conditions of temperature and humidity, given for a stated fraction and confidence level, and corresponding to a reasonable expected service lifetime under normal conditions
3.1.2
design thermal value
design thermal conductivity or design thermal resistance
Note 1 to entry: A given product can have more than one design value, for different applications or environmental conditions.
3.1.3
design thermal conductivity
value of thermal conductivity of a building material or product under specific external and internal conditions, which can be considered as typical of the performance of that material or product when incorporated in a building component
3.1.4
design thermal resistance
value of thermal resistance of a building product under specific external and internal conditions, which can be considered as typical of the performance of that product when incorporated in a building component
3.1.5
material
piece of a product irrespective of its delivery form, shape and dimensions, without any facing or coating
3.1.6
product
final form of a material ready for use, of given shape and dimensions and including any facings or coatings
3.2 Symbols and units
| Symbol | Quantity | Unit |
|---|---|---|
| cp | specific heat capacity at constant pressure | J/(kg·K) |
| Fa | ageing conversion factor | — |
| Fm | moisture conversion factor | — |
| FT | temperature conversion factor | — |
| fT | temperature conversion coefficient | K−1 |
| fu | moisture conversion coefficient mass by mass a | kg/kg |
| fy | moisture conversion coefficient volume by volume a | m3/m3 |
| R | thermal resistance | m2·K/W |
| sd | water vapour diffusion-equivalent air layer thickness | m |
| T | thermodynamic temperature | K |
| u | moisture content mass by mass | kg/kg |
| λ | thermal conductivity | W/(m·K) |
| μ | water vapour resistance factor | — |
| ρ | density | kg/m3 |
| Ψ | moisture content volume by volume | m3/m3 |
Bibliography
| 1 | ISO 2602, Statistical interpretation of test results — Estimation of the mean — Confidence interval |
| 2 | ISO 2854, Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
| 3 | ISO 8301, Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus |
| 4 | ISO 8302, Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| 5 | ISO 9053, Acoustics — Materials for acoustical applications — Determination of airflow resistance |
| 6 | ISO 9346, Hygrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary |
| 7 | ISO 10292, Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing |
| 8 | ISO 16269-6:2005, Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| 9 | EN 1745, Masonry and masonry products — Methods for determining design thermal values |
| 10 | EN 10088-1, Stainless steels — Part 1: List of stainless steels |
| 11 | EN 12524, Building materials and products — Hygrothermal properties — Tabulated design values |
| 12 | EN 12664, Thermal performance of building materials ans products — Determination of thermal resistance by means of guarded hot plate and heat flow meter methods — Dry and moist products of medium and low thermal resistance |
| 13 | EN 12667, Thermal performance of building materials and products — Determination of thermal resistance by means of guarded hot plate and heat flow meter methods — Products of high and medium thermal resistance |
| 14 | EN 12939, Thermal performance of building materials and products — Determination of thermal resistance by means of guarded hot plate and heat flow meter methods — Thick products of high and medium thermal resistance |
| 15 | Anderson, B.R. et al., Analysis, selection and statistical treatment of thermal properties of building materials for the preparation of harmonised design values. Final report of the Thermal Values Group, coordinated by Building Research Establishment (BRE), UK |
| 16 | Campanale, M., Determination of thermal resistance of thick specimens by means of a guarded hot plate or heat flow meter. Istituto di Fisica Tecnica, Università di Padova, Padua, Italy |
| 17 | Campanale, M. and De Ponte, F., Temperature effect on steady-state heat transfer properties of insulating materials. Istituto di Fisica Tecnica, Università di Padova, Padua, Italy |
| 18 | Bisiol, B., Campanale, M. and Moro, L., Theoretical and experimental characterization of insulating cork boards. Istituto de Fisica Tecnica, Facoltà di Ingegneria, Università di Padova, Padua, Italy |
| 19 | Campanale, M., De Ponte, F., Moro, L. and Zardo, V., Separation of radiative contribution in heat transfer in polyurethanes. Istituto de Fisica Tecnica, Università di Padova, Padua, Italy |
| 20 | Campanale, M., De Ponte, F. and Moro, L., Theoretical characterization of homogeneous cellular plastic materials. Istituto de Fisica Tecnica, Facoltà di Ingegneria, Università di Padova, Padua, Italy |
| 21 | De Ponte, F., High Temperatures — High Pressures, Vol. 19 , 1987, pp. 237-249, Combined radiation and conduction heat transfer in insulating materials. 10 ETPC Proceedings, p. 349 |
| 22 | Kumaran, M.K., IEA Annex 24, Heat, air and moisture transfer in insulated envelope parts, Volume 3 , Task 3: Material Properties. Reviewed by Per Jostein Hovde; edited by Fatin Ali Mohamed. Final report. Leuven: Laboratorium Bouwfysica, Departement Burgerlijke Bouwkunde, 1996, ISBN 90-75741-01-4 |