この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この国際規格は、土壌中の不飽和透水係数と土壌保水特性を同時に測定する実験室法を規定しています。乾燥曲線または脱着曲線の測定にのみ適用されます。この方法の適用は、可能な限り均一な土壌サンプルに限定されます。この方法は、水頭hm = 0 cm からhm = −800 cm の範囲で収縮する土壌には適用できません。
導電率の測定範囲は、土壌の種類によって異なります。これは、およそhm = −50 cm とhm = −700 cm のマトリック ヘッドの間にあります。
保水特性の測定範囲は、約hm = 0 cm とhm = -800 cm のマトリック水頭の間にあります。
注記 1浸透計法を使用して、飽和に近い透水係数を決定できます。
注記 2 ISO 11274 は、0 cm から - 15 000 cm までの水頭の保水特性を決定する方法を示しています。
1 Scope
This International Standard specifies a laboratory method for the simultaneous determination in soils of the unsaturated hydraulic conductivity and of the soil water-retention characteristic. It is applicable only to measurement of the drying or desorption curve. Application of the method is restricted to soil samples which are, as far as possible, homogeneous. The method is not applicable to soils which shrink in the range of matric head hm = 0 cm to hm = −800 cm.
The range of the determination of the conductivity depends on the soil type. It lies between matric heads of approximately hm = −50 cm and hm = −700 cm.
The range of the determination of the water-retention characteristic lies between matric heads of approximately hm = 0 cm and hm = −800 cm.
NOTE 1 An infiltrometer method can be used to determine hydraulic conductivities near saturation.
NOTE 2 ISO 11274 gives methods to determine the water-retention characteristic for matric heads between 0 cm and − 15 000 cm.