ISO 11275:2004 土壌の質—不飽和水力伝導率と保水特性の決定—風の蒸発法 | ページ 6

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

3 用語と定義

このドキュメントでは、次の用語と定義が適用されます。

3.1

透水係数

K

等方性条件を仮定すると、土壌水フラックス密度vとダーシー方程式の動水勾配 ∇ hhの間の比例係数、すなわち
  • v = − K ∇ hh

注記1:この文書の目的上、導電率は不飽和透水係数と同義で使用されます。

3.2

土壌保水特性

保持特性

与えられた土壌(サンプル)の土壌含水量と土壌水頭の関係

3.3

重力ヘッド

土壌水と組成が同一の極微量の水を、指定された高さと大気圧の水たまりから、その点の高さの同様の水たまりに、可逆的かつ等温的に輸送するために行わなければならない仕事の量。検討中、輸送された水の質量で割った値

3.4

マトリックスヘッド

土壌水と組成が同一の微量の水を、考慮中の点の高さと外部ガス圧のプールから、検討中の点を、輸送された水の質量で割った値

3.5

空気圧ヘッド

土壌水と組成が同一の極微量の水を、大気圧下で検討中の点の標高にあるプールから、同じ場所にある同様のプールに可逆的かつ等温的に輸送するために行わなければならない仕事の量。輸送された水の質量で割った、検討中のポイントの外部ガス圧

3.6

プレッシャーヘッド

張力計ヘッド

マトリックスヘッドと空気圧ヘッドの合計

注記1この方法の目的のために、空気圧ヘッドはゼロであると仮定されます。これに基づいて、圧力水頭はマトリックス水頭に等しくなります。

3.7

油圧ヘッド

マトリックス、空気圧、および重力ヘッドの合計

参考文献

[1]Halbertsma , JM および V eerman , GJ土壌の水力関数を決定するための蒸発法の新しい計算手順と簡単なセットアップ。レポート 88, DLO Winand Staring Centre, ワーヘニンゲン、オランダ (1994)
[2]W ind , GP 簡便な方法で推定された毛管伝導率データ。中: PE Rijtema および H. Wassin, 不飽和帯の水、Wageningen シンポジウムの議事録、1966 年 6 月、IASH Gentbrugge/UNESCO Paris, (1968) Vol. 1: pp. 181-191
[3]van G enuchten , M. Th. 不飽和土壌の透水係数を予測するための閉形式方程式。土壌科学協会ジャーナル、44, 1980 、 pp.892-898
[4]M ualem , YA 不飽和多孔質媒体の透水係数を予測するための新しいモデル。水資源研究, 12 , 1976, pp. 513-522
[5]Tamari, S.、Bruckler, L, H albertsma 、J. C hadoeuf JA 実験室で土壌の水理特性を決定するための簡単な方法。土壌科学協会ジャーナル、 57, 1993 、pp.642-651
[6]Halbertsma 、J. Wind の蒸発法、土壌サンプルの保水特性と不飽和透水係数の決定。可能性、長所と短所。内容: Durner, W.、Halbertsma, J.、Cislerova, M. (eds)、 European Workshop on Advanced Methods to determine Hydraulic Properties of Soils 、トゥルナウ、ドイツ、1996 年 6 月 10 ~ 12 日、バイロイト大学水文学部、(1996)pp.55-58
[7]S antini , A. Contenuto d'acqua del suolo [土壌水分量 In: M Pagliai (ed.) Methods of analisi física del suolo [土壌物理分析の方法フランコ・エンジェル、1997
[8]Klute 、A.、土壌分析の方法、 Part 1:物理的および鉱物学的方法。農学モノグラフNo. , nd .社会農業、ウィスコンシン、米国、1986
[9]Reeve , MJ およびCarter , AD: 水の放出特性。中: Smith, K. and Mullins, C. (eds.)土壌分析: 物理的方法。マルセル・デッカー、ニューヨーク、(1991)

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1

hydraulic conductivity

К

factor of proportionality between the soil water flux density, v, and the hydraulic gradient ∇hh in Darcy's equation, assuming isotropic conditions, i.e.
  • v = −K∇hh

Note 1 to entry: For the purposes of this document, conductivity is used synonymously for unsaturated hydraulic conductivity.

3.2

soil water-retention characteristic

retention characteristic

relation between soil water content and soil matric head of a given soil (sample)

3.3

gravitational head

amount of work that must be done in order to transport reversibly and isothermally an infinitesimal quantity of water, identical in composition to the soil water, from a pool at a specified elevation and at atmospheric pressure, to a similar pool at the elevation of the point under consideration, divided by the mass of water transported

3.4

matric head

amount of work that must be done in order to transport reversibly and isothermally an infinitesimal quantity of water, identical in composition to the soil water, from a pool at the elevation and the external gas pressure of the point under consideration, to the soil water at the point under consideration, divided by the mass of water transported

3.5

pneumatic head

amount of work that must be done in order to transport reversibly and isothermally an infinitesimal quantity of water, identical in composition to the soil water, from a pool at atmospheric pressure and at the elevation of the point under consideration, to a similar pool at the external gas pressure of the point under consideration, divided by the mass of water transported

3.6

pressure head

tensiometer head

sum of the matric and pneumatic heads

Note 1 to entry: The pneumatic head is assumed to be zero for the purposes of this method. On this basis, the pressure head equals the matric head.

3.7

hydraulic head

sum of the matric, pneumatic and gravitational heads

Bibliography

[1]Halbertsma, J.M. and Veerman, G.J. A new calculation procedure and simple set-up for the evaporation method to determine soil hydraulic functions. Report 88, DLO Winand Staring Centre, Wageningen, The Netherlands (1994)
[2]Wind, G.P. Capillary conductivity data estimated by a simple method. In: P.E. Rijtema and H. Wassink (eds.), Water in the unsaturated zone, Proceedings of the Wageningen symposium, June 1966, IASH Gentbrugge/UNESCO Paris, (1968) Vol. 1: pp. 181-191
[3]van Genuchten, M. Th. A closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Science Society of America Journal, 44, 1980, pp. 892-898
[4]Mualem, Y.A new model for predicting the hydraulic conductivity of unsaturated porous media. Water Resources Research, 12 , 1976, pp. 513-522
[5]Tamari, S., Bruckler, L, Halbertsma, J. Chadoeuf J.A simple method for determining soil hydraulic properties in the laboratory. Soil Science Society of America Journal, 57 , 1993, pp. 642-651
[6]Halbertsma, J. Wind's evaporation method, determination of the water-retention characteristic and unsaturated hydraulic conductivity of soil samples; Possibilities, advantages and disadvantages. In: Durner, W., Halbertsma, J., Cislerova, M. (eds), European Workshop on Advanced Methods to Determine Hydraulic Properties of Soils, Thurnau, Germany, June 10-12, 1996, Department of Hydrology, University of Bayreuth, (1996) pp. 55-58
[7]Santini, A. Contenuto d'acqua del suolo [Soil water content]. In: M Pagliai (ed.) Metodi di analisi física del suolo [Methods for soil physical analysis]. Franco Angell, 1997
[8]Klute, A., Methods of soil analysis, Part 1: Physical and mineralogical methods. Agronomy Monograph No. 9 (2nd edition), Amer. Soc. Agr., Wisconsin, U.S.A., 1986
[9]Reeve, M.J. and Carter, A.D.: Water release characteristic. In: Smith, K. and Mullins, C. (eds.) Soil analysis: Physical Methods. Marcel Dekker, New York, (1991)