この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、ISO 11299-1 と連携して、ガス供給ネットワークの改修に使用することを目的とした密着ライニング システムの要件と試験方法を指定します。
製造されたままのパイプと継手、および設置されたライニング システムに適用され、工場または現場で削減される固体壁単層構造または共押出層構造のポリエチレン (PE) パイプに適用されます。密着した独立型または相互作用型の圧力パイプ ライナーと、ライニング システムの構築に関連する継手およびジョイントを提供するための文書です。この文書は、外側に剥離可能な連続した熱可塑性プラスチックの追加層を持つコーティングされた PE パイプには適用されません。パイプ。
基準温度として 20 °C の動作温度で使用することを目的とした PE パイプ、継手、アセンブリに適用されます。
注他の動作温度については、ISO 4437-5:2014 にガイダンスが記載されています。
1 Scope
This document, in conjunction with ISO 11299-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of gas supply networks.
It applies to pipes and fittings, as manufactured, as well as to the installed lining system. It is applicable to polyethylene (PE) pipe of either solid wall single layer or co-extruded layer construction, which is reduced in the factory or on site to provide a close-fitting independent or interactive pressure pipe liner, as well as associated fittings and joints for the construction of the lining system. This document is not applicable for coated PE pipes having a peelable, contiguous, thermoplastics additional layer on the outside of the pipes.
It is applicable to PE pipes, fittings and assemblies intended to be used at an operating temperature of 20 °C as the reference temperature.
NOTE For other operating temperatures, guidance is given in ISO 4437-5:2014.