この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3126, プラスチック配管システム - プラスチック部品 - 寸法の決定
- ISO 4437-1, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 1: 一般
- ISO 4437-2, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 2: パイプ
- ISO 4437-3, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 3: 継手
- ISO 4437-4, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 4: バルブ
- ISO 4437-5:2014, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 5: システムの目的への適合性
- ISO 11299-1:2018, 地下ガス供給ネットワーク改修のためのプラスチック配管システム — Part 1: 概要
- ISO 12176-1, プラスチックパイプおよび継手 — ポリエチレンシステムを融着接合するための機器 — Part 1: 突合せ融着
- ISO 12176-2, プラスチックパイプおよび継手 — ポリエチレンシステムを融着接合するための機器 — Part 2: 電気融着
- EN 1555-1, 気体燃料供給用のプラスチック配管システム — ポリエチレン (PE) — Part 1: 一般
- EN 1555-2, 気体燃料供給用プラスチック配管システム — ポリエチレン (PE) — Part 2: パイプ
- EN 1555-3, 気体燃料供給用プラスチック配管システム — ポリエチレン (PE) — Part 3: 継手
- EN 1555-4, 気体燃料供給用プラスチック配管システム — ポリエチレン (PE) — Part 4: バルブ
- EN 1555-5:2010, 気体燃料供給用プラスチック配管システム — ポリエチレン (PE) — Part 5: システムの目的への適合性
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3126, Plastics piping systems — Plastics components — Determination of dimensions
- ISO 4437-1, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
- ISO 4437-2, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
- ISO 4437-3, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
- ISO 4437-4, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
- ISO 4437-5:2014, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system
- ISO 11299-1:2018, Plastics piping systems for renovation of underground gas supply networks — Part 1: General
- ISO 12176-1, Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
- ISO 12176-2, Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
- EN 1555-1, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
- EN 1555-2, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
- EN 1555-3, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
- EN 1555-4, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
- EN 1555-5:2010, Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system