この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語と定義
この文書の目的上、ISO 12100:2010, ISO 13574:2015, および以下に記載されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
最大許容圧力
機器または配管システムが設計された最大圧力
注記 1:この定義は、ISO 13574: 2015, 2.132 で指定されている定義より優先されます。
3.2
ラインバーナー
ハウジングwhere 線形または格子状の形状をしているバーナー。通常、燃料、空気、または燃料/空気混合物を導入するための複数のノズルまたはその他の要素が装備され、1 つのノズル/要素から別のノズル/要素への火炎伝播によって線形または格子状の火炎パターンを作成します。
参考文献
| 1 | ISO 13849-1:2015, 機械の安全性 — 制御システムの安全関連部品 — Part 1: 設計の一般原則 |
| 2 | ISO 22967:2010, 強制通風ガスバーナー |
| 3 | ISO 22968:2010, 強制通風オイルバーナー |
| 4 | ISO 23551-4:2018, ガスバーナーおよびガス燃焼器具の安全および制御装置 — 特定要件 — Part 4: 自動遮断バルブのバルブ証明システム |
| 5 | ISO/TR 15916:2015, 水素システムの安全性に関する基本的な考慮事項 |
| 6 | IEC 60079-10-1:2020, 爆発性雰囲気 – Part 10-1: エリアの分類 – 爆発性ガス雰囲気 |
| 7 | IEC 61508-1:2010, 電気/電子/プログラム可能な電子安全関連システムの機能安全 — Part 1: 一般要件 |
| 8 | IEC 61508-2:2010, 電気/電子/プログラム可能な電子安全関連システムの機能安全 — Part 2: 電気/電子/プログラム可能な電子安全関連システムの要件 |
| 9 | IEC 61508-3:2010, 電気/電子/プログラム可能な電子安全関連システムの機能安全 — Part 3: ソフトウェア要件 |
| 10 | IEC 61508-4:2010, 電気/電子/プログラム可能な電子安全関連システムの機能安全 — Part 4: 定義と略語 |
| 11 | IEC 61508-5:2010, 電気/電子/プログラム可能な電子安全関連システムの機能安全 — Part 5: 安全完全性レベルを決定する方法の例 |
| 12 | IEC 61508-6:2010, 電気/電子/プログラム可能な電子安全関連システムの機能安全 — Part 6: IEC 61508‑2 および IEC 61508‑3 の適用に関するガイドライン |
| 13 | IEC 61508-7:2010, 電気/電子/プログラム可能な電子安全関連システムの機能安全 — Part 7: 技術と対策の概要 |
| 14 | IEC 61511-1:2016, 機能安全 — プロセス産業部門向けの安全計装システム — Part 1: フレームワーク、定義、システム、ハードウェア、およびアプリケーション プログラミング要件 |
| 15 | IEC 61511-2:2016, 機能安全 — プロセス産業部門向けの安全計装システム — Part 2: IEC 61511-1:2016 の適用ガイドライン |
| 16 | IEC 61511-3:2016, 機能安全 — プロセス産業部門向けの安全計装システム — Part 3: 必要な安全完全性レベルの決定に関するガイダンス |
| 17 | IEC 62061:2021, 機械の安全性 - 安全関連制御システムの機能安全 |
| 18 | AS 1375:2013, 産業用燃料燃焼機器 (オーストラリア規格) |
| 19 | EN 437:2021, テストガス - テスト圧力 - 機器カテゴリ |
| 20 | EN 1643:2014, ガスバーナーおよびガス燃焼器具の安全および制御装置 – 自動遮断バルブ用のバルブ証明システム |
| 21 | UL 353:2011, 制限管理 |
| 22 | FM 3545:2013, 温度制限および監視スイッチ |
| 23 | EIGA IGC Doc 13/20/E, 酸素パイプラインおよび配管システム、 https://www.eiga.eu/uploads/documents/DOC013.pdf で入手可能 |
| 24 | 米国労働省 – OSHA – 29 CFR Part. 1910 |
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12100:2010, ISO 13574:2015 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
maximum allowable pressure
maximum pressure for which the equipment or piping system is designed
Note 1 to entry: This definition takes precedence over the definition specified in ISO 13574: 2015, 2.132.
3.2
line-burner
burner where the housing has a linear or grid style geometry typically equipped with multiple nozzles or other elements for introduction of fuel, air or fuel/air-mixtures and creating a linear or grid shape flame pattern by flame propagation from one nozzle/element to another
Bibliography
| 1 | ISO 13849-1:2015, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| 2 | ISO 22967:2010, Forced draught gas burners |
| 3 | ISO 22968:2010, Forced draught oil burners |
| 4 | ISO 23551-4:2018, Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 4: Valve-proving systems for automatic shut-off valves |
| 5 | ISO/TR 15916:2015, Basic considerations for the safety of hydrogen systems |
| 6 | IEC 60079-10-1:2020, Explosive atmospheres – Part 10-1: Classification of areas – Explosive gas atmospheres |
| 7 | IEC 61508-1:2010, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 1: General requirements |
| 8 | IEC 61508-2:2010, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| 9 | IEC 61508-3:2010, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 3: Software requirements |
| 10 | IEC 61508-4:2010, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 4: Definitions and abbreviations |
| 11 | IEC 61508-5:2010, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 5: Examples of methods for the determination of safety integrity levels |
| 12 | IEC 61508-6:2010, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 6: Guidelines on the application of IEC 61508‑2 and IEC 61508‑3 |
| 13 | IEC 61508-7:2010, Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 7: Overview of techniques and measures |
| 14 | IEC 61511-1:2016, Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework, definitions, system, hardware and application programming requirements |
| 15 | IEC 61511-2:2016, Functional safety — Safety instrumented systems for the process industry sector — Part 2: Guidelines for the application of IEC 61511‑1:2016 |
| 16 | IEC 61511-3:2016, Functional safety — Safety instrumented systems for the process industry sector — Part 3: Guidance for the determination of the required safety integrity levels |
| 17 | IEC 62061:2021, Safety of machinery - Functional safety of safety-related control systems |
| 18 | AS 1375:2013, Industrial fuel-fired appliances (Australian Standard) |
| 19 | EN 437:2021, Test gases - Test pressures - Appliance categories |
| 20 | EN 1643:2014, Safety and control devices for gas burners and gas burning appliances – Valve proving systems for automatic shut-off valves |
| 21 | UL 353:2011, Limit controls |
| 22 | FM 3545:2013, Temperature limit and supervisory switches |
| 23 | EIGA IGC Doc 13/20/E, Oxygen pipeline and piping systems, available at: https://www.eiga.eu/uploads/documents/DOC013.pdf |
| 24 | United States Department of Labor – OSHA - 29 CFR Part. General Industry Standards, 1910 |