※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- 国際海事機関。海上における人命の安全に関する国際条約、2014 年 (SOLAS) 、第 II-2 章、規則 3 および 9
- 国際海事機関。船舶による汚染の防止に関する国際条約、1973 年、これに関連する 1978 年の議定書によって修正されたもの (MARPOL)
- IEC 60092, 船舶の電気設備
- IEC 60092-201:1994, 船舶の電気設備 - Part 201: システム設計 - 一般
- IEC 60092-202:2016, 船舶の電気設備 - Part 202: システム設計 - 保護
- IEC 60092-301:1980, 船舶の電気設備 - Part 301: 機器 - 発電機およびモーター
- IEC 60092-352:2005, 船舶の電気設備 - Part 352: 低電圧電力システム用のケーブルの選択と設置
- IEC 60092-503:2007, 船舶の電気設備 - Part 503: 特殊機能 - 1 kV から 11 kV までの範囲の電圧を備えた AC 供給システム
- IEC 60529:198, エンクロージャによって提供される保護等級 (IP コード)
- ISO/IEC 17025:2017, 試験および校正機関の能力に関する一般要件
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- International Maritime Organization. International Convention on the Safety of Life at Sea, 2014 (SOLAS), Chapter II-2, Regulations 3 and 9
- International Maritime Organization. International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating thereto (MARPOL)
- IEC 60092, Electrical installations in ships
- IEC 60092-201:1994, Electrical installations in ships — Part 201: System design — General
- IEC 60092-202:2016, Electrical installations in ships — Part 202: System design — Protection
- IEC 60092-301:1980, Electrical installations in ships — Part 301: Equipment — Generators and motors
- IEC 60092-352:2005, Electrical installations in ships — Part 352: Choice and installation of cables for low-voltage power systems
- IEC 60092-503:2007, Electrical installations in ships — Part 503: Special features — A.C. supply systems with voltages in the range of 1 kV and up to and including 11 kV
- IEC 60529:1989 (Amd 1:1999, Amd 2:2013), Degrees of protection provided by enclosures (IP Code)
- ISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories