この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質に関する説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次を参照してください。次の URL: www.iso.org/iso/foreword.html
このドキュメントは、技術委員会 CEN/TC 290, 寸法および形状製品の仕様および検証と協力して、技術委員会 ISO/TC 213, 寸法および形状製品の仕様および検証によって作成されました。
この第 3 版は、次の変更で技術的に改訂された第 2 版 (ISO 14253-1:2013) を取り消して置き換えます。
- このコンテンツは、ISO/IEC Guide 98-4 を適用し、基礎となる確率を表す間隔を使用して単純化することを推奨しています。その結果、デフォルトのカバレッジ係数k = 2 は、デフォルトの適合確率 95% に置き換えられました。これにより、仕様間隔と測定の不確かさの関係に関係なく、リスクは一定になります。追加情報については、付録 A を参照してください。
- 一部の用語が更新されました。
- 母集団仕様修飾子の説明は削除され、ISO 18391 で確認できるようになりました。
ISO 14253 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification, in collaboration with Technical Committee CEN/TC 290, Dimensional and geometrical product specification and verification.
This third edition cancels and replaces the second edition (ISO 14253-1:2013), which has been technically revised with the following changes:
- The content applies ISO/IEC Guide 98-4 and gives recommendation for simplification by using intervals representing the underlying probability. As a consequence, the default coverage factor k = 2 has been replaced with a default conformance probability of 95 %. This makes the risk constant, regardless of the relationship between the specification interval and the measurement uncertainty. See Annex A for additional information.
- Some terminology has been updated.
- The explanation for the population specification modifier has been removed and can now be found in ISO 18391.
A list of all parts in the ISO 14253 series can be found on the ISO website.