この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
システム仕様
この国際規格は、AVI/AEI システムのユーザーと供給者が、DSRC リンクに基づく公称相互運用性を可能にするシステム仕様を指定できるように設計されています。
「AVI」と「AEI」という用語は、どちらも「独立して機能する AVI/AEI システム」を説明するために、また「他の RTTT/TICS システム内での識別機能」として使用されます。この国際規格は、他のアプリケーションまたはセクターの規格が適用されない場合の両方の使用をサポートします。
すべての環境およびすべての動作条件下で動作するための単一の要件セットを決定することが望ましい場合もありますが、これは許容できないコストを課す可能性があります。
したがって、この国際規格は、システム指定者が特定の要件を満たすために適切な性能パラメータを選択できるように、システム仕様のさまざまな側面に標準「クラス」を提供します。サポート情報付属書は、相互運用可能なアプリケーションをサポートするための環境および動作パラメータを指定するために使用できる、多くの一般的な使用「カテゴリ」も提供します。
この国際規格で提供されるアーキテクチャの説明は、CEN/TC 278 WG13 ISO/TC 204 WG1 によって提供されるガイドラインに準拠しています。
データ構造要素には、Abstract Syntax Notation One (ASN.1) Packed Encoding Rules (PER) (ISO 8825-2) が使用されます。この使用法により、最大の相互運用性と既存の標準への準拠が実現します。
AVI/AEI アプリケーションでの ASN.1 PER の使用に関する詳細については、ISO 14816 を参照してください。
この国際規格は、システム定義をサポートするために必要な分類手順と詳細なテスト要件を提供します。これらの要件は、可能な限り、既存の標準と確立された慣行を参照して決定されます。
テスト要件
AVI/AEI システム コンポーネントのテスト要件が決定されます。この国際規格を満たすための要件には、一般的な性能測定、運用、および環境の側面が含まれます。
この国際規格の使い方
また、ユーザーにさまざまなアプリケーションを提供し、さまざまな環境状況で、さまざまなニーズに対応するのに十分な柔軟性を備えた便利なツールを提供することも目的です。この国際規格の分類および分類システムは、これを規定しています。
この国際規格の使用方法を示す簡単なガイドは、附属書 A の最後に記載されています。
Introduction
System specification
This International Standard is designed to enable users and suppliers of AVI/AEI systems to specify system specification that will enable a nominal interoperability based on a DSRC link.
The terms “AVI” and “AEI” are used both to describe “independently functioning AVI/AEI systems” and as “the function of identification within other RTTT/TICS systems”. This International Standard supports both such uses where no other application or sector standard applies.
Whilst it may be desirable to determine a single set of requirements for operation in all environments and under all operating conditions, this could impose unacceptable costs.
This International Standard therefore provides standard “classes” for different aspects of system specification, such that a system specifier may select the appropriate performance parameters to meet a particular requirement. Supporting informative annexes also provide a number of general use “categories” which may be used to specify the environmental and operating parameters to support interoperable applications.
The architecture descriptions provided in this International Standard are in compliance with the guidelines provided by CEN/TC 278 WG13 ISO/TC 204 WG1.
For the data structure elements, Abstract Syntax Notation One (ASN.1) Packed Encoding Rules (PER) (ISO 8825-2) are used. This usage provides maximum interoperability and conformance to existing standards.
For detailed information on the use of ASN.1 PER for AVI/AEI applications, reference is made to ISO 14816.
This International Standard provides classification procedures and details test requirements needed to support system definition. These requirements are, wherever possible, determined by reference to existing standards and established practices.
Test requirements
Test requirements are determined for AVI/AEI system components. The requirements to meet this International Standard encompass general performance measurement, operational, and environmental aspects.
How to use this International Standard
It is also an objective to provide users with different applications and in different environmental circumstances a useful tool that is flexible enough to serve the various different needs. The categorization and classification system in this International Standard provides for this.
A brief guide showing how to use this International Standard is provided at the end of Annex A.