この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 80000-1:2009, 数量と単位 - Part 1: 一般
- ISO 148-1, 金属材料 — シャルピー振り子衝撃試験 — Part 1: 試験方法
- ISO 3183:2012, 石油および天然ガス産業 - パイプライン輸送システム用鋼管
- ISO 650, 金属材料 - ビッカース硬さ試験
- ISO 650, 金属材料 - ロックウェル硬さ試験
- ISO 6892-1, 金属材料 - 引張試験 - Part 1: 室温での試験方法
- ISO 6892-2, 金属材料 - 引張試験 - Part 2: 高温での試験方法
- ISO 7438, 金属材料 - 曲げ試験
- ISO 7539-2, 金属および合金の腐食 - 応力腐食試験 - Part 2: 曲げ梁試験片の準備と使用
- ISO 8501-1, 塗料および関連製品を塗布する前の鋼基材の準備 — 表面清浄度の視覚的評価 — Part 1: コーティングされていない鋼基材および以前のコーティングを完全に除去した後の鋼基材の錆の程度と準備の程度
- ISO 9712, 非破壊検査 — NDT 担当者の資格と認定
- ISO 10474, 鉄鋼および鉄鋼製品 — 検査書類
- ISO 10893-4, 鋼管の非破壊検査 — Part 4: 表面の欠陥を検出するためのシームレスおよび溶接鋼管の液体浸透検査
- ISO 10893-5, 鋼管の非破壊検査 - Part 5: 表面の欠陥を検出するためのシームレスおよび溶接された強磁性鋼管の磁粉検査
- ISO 10893-8, 鋼管の非破壊検査 - Part 8: 層状欠陥の検出のためのシームレスおよび溶接鋼管の自動超音波検査
- ISO 10893-9, 鋼管の非破壊検査 - Part 9: 溶接鋼管の製造に使用されるストリップ/プレートの層状欠陥を検出するための自動超音波検査
- ISO 10893-10:2011, 鋼管の非破壊検査 - Part 10: 縦方向および/または横方向の欠陥を検出するためのシームレスおよび溶接 (サブマージ アーク溶接を除く) 鋼管の全周自動超音波検査
- ISO 10893-11:2011, 鋼管の非破壊検査 - Part 11: 縦方向および/または横方向の欠陥を検出するための溶接鋼管の溶接シームの自動超音波検査
- ISO 13623, 石油および天然ガス産業 - パイプライン輸送システム
- ASNT SNT-TC-1A, 推奨実践番号SNT-TC-1A: 非破壊検査における要員の資格と認定
- ASTM A370, 鉄鋼製品の機械試験の標準試験方法と定義
- ASTM A435, 鋼板のストレートビーム超音波検査の標準仕様
- ASTM A578/ A578M, 特殊用途の圧延鋼板のストレートビーム超音波検査の標準仕様
- ASTM E18, 金属材料のロックウェル硬度の標準試験方法
- ASTM E92, 金属材料のビッカース硬度の標準試験方法
- ASTM E112, 平均粒径を決定するための標準試験方法
- ASTM E165, 液体浸透試験の標準試験法
- ASTM E213, 金属パイプおよびチューブの超音波試験の標準手法
- ASTM E214, 超音波パルスエコー直進ビーム接触試験の標準実施
- ASTM E340, 金属および合金のマクロエッチングの標準試験方法
- ASTM E709, 磁粒子試験の標準ガイド
- ASTM E797, 手動超音波パルスエコー接触法による厚さ測定の標準手法
- ASTM G39, 曲げ梁応力腐食試験片の作成と使用に関する標準慣行
- NACE/TM 0177:2016, 硫化水素 (H 2 S) 環境における硫化物応力亀裂耐性に関する金属の実験室試験
- NACE/TM 0284:2016, 標準試験方法 - 水素誘起亀裂に対する耐性に関するパイプラインおよび圧力容器鋼の評価
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 80000-1:2009, Quantities and units — Part 1: General
- ISO 148-1, Metallic materials — Charpy pendulum impact test — Part 1: Test method
- ISO 3183:2012, Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
- ISO 6507 (all parts), Metallic materials — Vickers hardness test
- ISO 6508 (all parts), Metallic materials — Rockwell hardness test
- ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature
- ISO 6892-2, Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
- ISO 7438, Metallic materials — Bend test
- ISO 7539-2, Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
- ISO 8501-1, Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
- ISO 9712, Non-destructive testing — Qualification and certification of NDT personnel
- ISO 10474, Steel and steel products — Inspection documents
- ISO 10893-4, Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
- ISO 10893-5, Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
- ISO 10893-8, Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
- ISO 10893-9, Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
- ISO 10893-10:2011, Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
- ISO 10893-11:2011, Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
- ISO 13623, Petroleum and natural gas industries — Pipeline transportation systems
- ASNT SNT-TC-1A, Recommended Practice No. SNT-TC-1A: Personnel Qualification and Certification in Nondestructive Testing
- ASTM A370, Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM A435, Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
- ASTM A578/ A578M, Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
- ASTM E18, Standard Test Methods for Rockwell Hardness of Metallic Materials
- ASTM E92, Standard Test Method for Vickers Hardness of Metallic Materials
- ASTM E112, Standard Test Methods for Determining Average Grain Size
- ASTM E165, Standard Test Method for Liquid Penetrant Examination
- ASTM E213, Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
- ASTM E214, Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
- ASTM E340, Standard Test Method for Macroetching Metals and Alloys
- ASTM E709, Standard Guide for Magnetic Particle Testing
- ASTM E797, Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
- ASTM G39, Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
- NACE/TM 0177:2016, Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in Hydrogen Sulfide (H2S) Environments
- NACE/TM 0284:2016, Standard Test Method — Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking