この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 148-1, 金属材料 — シャルピー振り子衝撃試験 — Part 1: 試験方法
- ISO 3452-1, 非破壊検査 — 浸透探傷検査 — Part 1: 一般原則
- ISO 4063, 溶接および関連プロセス - プロセスの命名法および参照番号
- ISO 4136, 金属材料の溶接部の破壊試験 - 横方向引張試験
- ISO 5173, 金属材料の溶接部の破壊試験 - 曲げ試験
- ISO 5817, 溶接 — 鋼、ニッケル、チタンおよびそれらの合金の溶融溶接継手 (ビーム溶接は除く) — 欠陥の品質レベル
- ISO 6520-1, 溶接および関連プロセス — 金属材料の幾何学的欠陥の分類 — Part 1: 溶融溶接
- ISO 6947, 溶接および関連プロセス - 溶接位置
- ISO 9015-1, 金属材料の溶接部の破壊試験 - 硬度試験 - Part 1: アーク溶接継手の硬度試験
- ISO 9016, 金属材料の溶接部の破壊試験 — 衝撃試験 — 試験片の位置、ノッチの方向および検査
- ISO 14175, 溶接消耗品 - 溶融溶接および関連プロセス用のガスおよびガス混合物
- ISO 15609-1, 金属材料の溶接手順の仕様および認定 — 溶接手順仕様 — 第 1 Part: アーク溶接
- ISO 15609-2, 金属材料の溶接手順の仕様および認定 — 溶接手順仕様 — Part 2: ガス溶接
- ISO 15613, 金属材料の溶接手順の仕様と認定 — 生産前溶接試験に基づく認定
- ISO 17636-1, 溶接部の非破壊検査 — 放射線検査 — Part 1: フィルムを使用した X 線およびガンマ線技術
- ISO 17636-2, 溶接部の非破壊検査 — 放射線検査 — Part 2: デジタル検出器を使用した X 線およびガンマ線技術
- ISO 17637, 溶接部の非破壊検査 — 溶融溶接継手の目視検査
- ISO 17638, 溶接部の非破壊検査 - 磁粉検査
- ISO 17639, 金属材料の溶接部の破壊試験 — 溶接部の肉眼的および顕微鏡的検査
- ISO 17640, 溶接部の非破壊検査 - 超音波検査 - 技術、検査レベル、および評価
- ISO/TR 15608, 溶接 - 金属材料グループ化システムのガイドライン
- ISO/TR 17671-1, 溶接 — 金属材料の溶接に関する推奨事項 — Part 1: アーク溶接に関する一般的なガイダンス
- ISO/TR 18491, 溶接および関連プロセス - 溶接エネルギー測定のガイドライン
- ISO/TR 20172, 溶接 — 材料のグループ化システム — 欧州材料
- ISO/TR 20173, 溶接 — 材料のグループ化システム — 米国材料
- ISO/TR 20174, 溶接 — 材料のグループ化システム — 日本の材料
- ISO/TR 2590, 溶接および関連プロセス — 語彙
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 148-1, Metallic materials — Charpy pendulum impact test — Part 1: Test method
- ISO 3452-1, Non-destructive testing — Penetrant testing — Part 1: General principles
- ISO 4063, Welding and allied processes — Nomenclature of processes and reference numbers
- ISO 4136, Destructive tests on welds in metallic materials — Transverse tensile test
- ISO 5173, Destructive tests on welds in metallic materials — Bend tests
- ISO 5817, Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
- ISO 6520-1, Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding
- ISO 6947, Welding and allied processes — Welding positions
- ISO 9015-1, Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints
- ISO 9016, Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
- ISO 14175, Welding consumables — Gases and gas mixtures for fusion welding and allied processes
- ISO 15609-1, Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding
- ISO 15609-2, Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 2: Gas welding
- ISO 15613, Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test
- ISO 17636-1, Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
- ISO 17636-2, Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
- ISO 17637, Non-destructive testing of welds — Visual testing of fusion-welded joints
- ISO 17638, Non-destructive testing of welds — Magnetic particle testing
- ISO 17639, Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
- ISO 17640, Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
- ISO/TR 15608, Welding — Guidelines for a metallic materials grouping system
- ISO/TR 17671-1, Welding — Recommendations for welding of metallic materials — Part 1: General guidance for arc welding
- ISO/TR 18491, Welding and allied processes — Guidelines for measurement of welding energies
- ISO/TR 20172, Welding — Grouping systems for materials — European materials
- ISO/TR 20173, Welding — Grouping systems for materials — American materials
- ISO/TR 20174, Welding — Grouping systems for materials — Japanese materials
- ISO/TR 25901 (all parts), Welding and allied processes — Vocabulary