この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令、 Part 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質に関する説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 204, Intelligent transport systemsによって作成されました。
この ISO 16410-1 の初版は、技術的に改訂された ISO/TS 16410-1:2011 の初版を取り消し、置き換えます。
次の変更が行われました。
- このドキュメントは、技術仕様から国際規格に変換されました。
- 基礎となる基本規格、特に ISO 17575 (すべての部分) への変更を反映するために修正が行われました。
- 主な変更点は次のとおりです。
- ISO 17575-1 および ISO 17575-3 によって導入されたデータ要素の変更。
- 以下に関連する新しいテスト目的:
- プロトコル バージョンの処理。
- 優れたコンテキスト パーティション。
- 料金計算アルゴリズム;
- 丸め規則;
- 代替通貨;
以下に関連するテスト目的は削除されました。
- 通信サービス;
- ISO 17575-3 で要求されなくなったコンテキスト データのサポートに関する規則。
用語と定義が改訂されました。
読みやすさを改善するための変更だけでなく、編集上および正式な修正が行われました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
This first edition of ISO 16410-1 cancels and replaces the first edition of ISO/TS 16410-1:2011, which has been technically revised.
The following changes have been made:
- this document has been converted from a Technical Specification to an International Standard;
- amendments have been made to reflect changes to the underlying base standards, especially ISO 17575 (all parts);
- major changes have been made regarding:
- data element changes introduced by ISO 17575-1 and ISO 17575-3;
- new test purposes related to:
- protocol version handling;
- toll context partitions;
- fee calculation algorithm;
- rounding rules;
- alternative currency;
test purposes related to the following have been removed:
- communications services;
- rules with respect to support of context data which are no longer required by ISO 17575-3;
the terms and definitions have been revised;
editorial and formal corrections, as well as changes to improve readability, have been made.