この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 179-1, プラスチック - シャルピー衝撃特性の測定 - Part 1: 機器を使用しない衝撃試験
- ISO 291, プラスチック - コンディショニングとテストのための標準的な雰囲気
- ISO 307, プラスチック - ポリアミド - 粘度数の測定
- ISO 472, プラスチック - 語彙
- ISO 527-1, プラスチック - 引張特性の測定 - Part 1: 一般原則
- ISO 527-2, プラスチック - 引張特性の測定 - Part 2: 成形および押出プラスチックの試験条件
- ISO 1043-1, プラスチック — 記号および略語 — Part 1: 基本的なポリマーとその特殊な特性
- ISO 1110, プラスチック - ポリアミド - 試験片の加速コンディショニング
- ISO 1167-1, 流体を搬送するための熱可塑性パイプ、継手およびアセンブリ — 内部圧力に対する抵抗の測定 — Part 1: 一般的な方法
- ISO 1167-2, 流体を搬送するための熱可塑性パイプ、継手およびアセンブリ — 内部圧力に対する抵抗の測定 — Part 2: パイプ試験片の準備
- ISO 1183-1, プラスチック — 非気泡プラスチックの密度を測定する方法 — Part 1: 浸漬法、液体比重瓶法、および滴定法
- ISO 1183-2, プラスチック — 非気泡プラスチックの密度を決定する方法 — Part 2: 密度勾配カラム法
- ISO 2505, 熱可塑性パイプ - 縦方向の反転 - 試験方法とパラメータ
- ISO 6259-1, 熱可塑性パイプ — 引張特性の測定 — Part 1: 一般試験方法
- ISO 6259-3, 熱可塑性パイプ — 引張特性の測定 — Part 3: ポリオレフィン パイプ
- ISO 6964, ポリオレフィン パイプおよび継手 — 焼成および熱分解によるカーボン ブラック含有量の測定 — 試験方法
- ISO 9080, プラスチック配管およびダクトシステム - 外挿によるパイプ形状の熱可塑性材料の長期静水圧強度の決定
- ISO 12162, 圧力用途のパイプおよび継手の熱可塑性材料 — 分類、指定、および設計係数
- ISO 13477, 流体搬送用熱可塑性パイプ — 急速亀裂伝播 (RCP) に対する耐性の測定 — 小規模定常状態試験 (S4 テスト)
- ISO 13478, 流体搬送用熱可塑性パイプ — 急速な亀裂伝播に対する耐性の決定 (RCP) — 実物大試験 (FST)
- ISO 13479, 流体輸送用ポリオレフィン パイプ - 亀裂伝播に対する抵抗の決定 - ノッチ付きパイプの遅い亀裂成長の試験方法
- ISO 13954, プラスチック パイプおよび継手 — 公称外径 90 mm 以上のポリエチレン (PE) 電気融合アセンブリの剥離剥離試験
- ISO 15512, プラスチック - 含水量の測定
- ISO 16396-1, プラスチック — ポリアミド (PA) 成形材料および押出材料 — Part 1: 指定システム、製品のマーキング、および仕様の根拠
- ISO 16396-2, プラスチック — ポリアミド (PA) 成形材料および押出材料 — Part 2: 試験片の準備と特性の決定
- ISO 16486-5, ガス燃料の供給のためのプラスチック配管システム — 溶融接合および機械的接合を備えた非可塑化ポリアミド (PA-U) 配管システム — Part 5: システムの目的への適合性
- ISO 16871, プラスチック配管およびダクト システム — プラスチック パイプおよび付属品 — 直接 (自然) 風化への暴露方法
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 179-1, Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
- ISO 291, Plastics — Standard atmospheres for conditioning and testing
- ISO 307, Plastics — Polyamides — Determination of viscosity number
- ISO 472, Plastics — Vocabulary
- ISO 527-1, Plastics — Determination of tensile properties — Part 1: General principles
- ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
- ISO 1043-1, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
- ISO 1110, Plastic — Polyamides — Accelerated conditioning of test specimens
- ISO 1167-1, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
- ISO 1167-2, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
- ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
- ISO 1183-2, Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
- ISO 2505, Thermoplastics pipes — Longitudinal reversion — Test method and parameters
- ISO 6259-1, Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
- ISO 6259-3, Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
- ISO 6964, Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
- ISO 9080, Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
- ISO 12162, Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
- ISO 13477, Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
- ISO 13478, Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
- ISO 13479, Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
- ISO 13954, Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
- ISO 15512, Plastics — Determination of water content
- ISO 16396-1, Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications
- ISO 16396-2, Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
- ISO 16486-5, Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
- ISO 16871, Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering