この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
導入
2000 年半ば以来、フルノッチ クリープ試験 (FNCT) は、要求の厳しい用途で使用されるポリエチレン (PE) 材料の環境応力亀裂 (ESC) を特徴付ける試験の 1 つとして広く使用されてきました。現在の ESC 試験の中で、FNCT は比較的シンプルで実施が容易であり、依然として PE 材料の ESC 耐性を特徴付ける高感度の実験室規模の試験方法です。 FNCT の利点は、試験条件 (試験片の形状、温度、媒体および負荷条件) を変化させて、PE 製品全体を評価できることです。
FNCT 法は 2004 年に PE 材料特性として標準化され、6 mm × 6 mm 断面試験片 ( Type B) の再現性に基づいた部分的な精度が記述されました。それ以来、複数の研究室間テストが実施され、その結果、10 mm × 10 mm の断面試験片 ( Type A) の再現性に関する記述が得られました。 Type A の試験片は、修正された圧縮成形条件を使用して作成され、元の成形条件と比較してより一貫した試験結果が得られます。
さらに、PE 100 RC として知られる新しい PE パイプ材料の最近の開発により、耐亀裂性が大幅に向上したため、これらの材料の試験条件を定義することが必要になりました。この文書の前版 (ISO 16770:2004) で指定された条件を使用してこれらの材料をテストしたところ、故障期間は 1 年以上でした。その結果、この文書には、耐クラック性が大幅に向上した PE 素材をカバーする拡張テスト条件が含まれています。拡張テスト条件を使用したこの加速テスト手順により、ISO 16770:2004 で規定されている従来のテスト条件と比較して故障時間を大幅に短縮できます。さらに、加速試験方法と従来の試験方法の間に良好な相関関係が得られました。参考文献 [4], [7], および [9] を参照してください。
FNCT は、材料の特性評価と生産モニタリングのテストであり、定義されたテスト条件を厳密に維持することで、類似の PE 材料または PE 材料のグループ間で関連性があり信頼性の高い比較が可能になります。
Introduction
Since mid-2000, the full-notch creep test (FNCT) has been widely used as one of the tests characterizing the environmental stress cracking (ESC) of polyethylene (PE) materials used in demanding applications. Among current ESC tests, the FNCT is relatively simple, easy to perform and still a sensitive laboratory scale test method to characterize ESC resistance of PE materials. The advantage of FNCT is that it enables the evaluation of the whole PE product range by variation of test conditions (test specimen geometry, temperature, medium and load conditions).
The FNCT method was standardized in 2004 as a PE material property, with partial precision statement based on the repeatability for a 6 mm × 6 mm-cross-sectional test specimen (Type B). Since then, several interlaboratory tests have been performed, resulting in a repeatability statement for 10 mm × 10 mm-cross-sectional test specimen (Type A). Type A specimen is prepared by using modified compression moulding conditions, which give more consistent test results compared to the original moulding conditions.
In addition, due to recent development of new PE pipe materials, known as PE 100 RC, which exhibit substantially improved crack resistance, it became necessary to define test conditions for these materials. Testing of these materials using the conditions specified in the previous edition of this document (i.e. ISO 16770:2004) resulted in failure times of one year or longer. As a consequence, this document includes extended test conditions to cover PE materials with substantially increased crack resistance. This accelerated test procedure using extended test conditions allows failure times to be reduced substantially compared to conventional test conditions given in ISO 16770:2004. In addition, a good correlation between accelerated and conventional test methods was derived; see References [4], [7] and [9].
The FNCT is a material characterization and production monitoring test, which, by strictly maintaining the test conditions defined, enables relevant and reliable comparison among similar PE materials or group of PE materials.