この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書では、定義された試験環境におけるポリエチレン (PE) 材料の耐環境応力亀裂 (ESC) 性を決定する方法を指定します。試験は、成形シート/試験片または完成品から機械加工されたノッチ付き試験片に対して実行されます。試験片は、指定された温度に保たれた界面活性剤溶液などの環境に浸漬されると、静的な引張荷重にさらされます。故障までの時間が測定されます。
この方法はポリエチレン材料用に特別に開発されましたが、パイプ、融着/継手、ブロー成形 PE 容器などの PE 製品を評価し、危険物や化学物質などの攻撃的な環境の影響を研究するために使用することもできます。
この方法は、選択した寸法に成形された試験片、圧縮成形シートや射出成形試験片、または成形品やパイプなどの完成品から機械加工された試験片での使用に適しています。試験片が押出成形品または成形品から機械加工される場合、結果は材料の特性だけでなく、加工中に導入される応力や方向によっても影響を受ける可能性があります。
1 Scope
This document specifies a method for determining the environmental stress cracking (ESC) resistance of polyethylene (PE) materials in a defined test environment. The test is carried out on notched test specimens machined from moulded sheets/specimens or from finished products. The test specimen is subjected to a static tensile load when immersed into an environment such as a surfactant solution held at a specified temperature. The time to failure is measured.
The method has been specifically developed for polyethylene materials but can be used to evaluate PE products, such as pipes, fusion welds/fittings and blow-moulded PE containers to study the effect of aggressive environments, i.e. dangerous goods and chemicals.
The method is suitable for use with test specimens moulded to chosen dimensions or machined from compression moulded sheets or injection moulded specimens, or from finished products, such as mouldings and pipes. When the test specimens are machined from extruded or moulded parts, the results can be affected not only by properties of the material, but also by stresses or orientation introduced during processing.