※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3741, 音響学 — 音圧を使用した騒音源の音響パワーレベルと音響エネルギーレベルの決定 — 残響試験室の精密な方法
- ISO 3743-1, 音響学 — 音圧を使用した騒音源の音響パワーレベルおよび音響エネルギーレベルの決定 — 残響音場における小型可動音源の工学的手法 — Part 1: 堅壁の試験室の比較手法
- ISO 3743-2, 音響学 — 音圧を使用した騒音源の音響パワーレベルの決定 — 残響フィールドにおける小型の移動可能な音源の工学的手法 — Part 2: 特殊な残響試験室の手法
- ISO 3744:2010, 音響学 — 音圧を使用した騒音源の音響パワーレベルと音響エネルギーレベルの決定 — 反射面上の本質的に自由な場のための工学的手法
- ISO 3745:2012, 音響学 — 音圧を使用した騒音源の音響パワーレベルと音響エネルギーレベルの決定 — 無響室および半無響室の精密な方法
- ISO 3746, 音響学 — 音圧を使用した騒音源の音響パワーレベルと音響エネルギーレベルの決定 — 反射面上の包み込む測定面を使用する調査方法
- ISO 3747, 音響学 — 音圧を使用した騒音源の音響パワーレベルと音響エネルギーレベルの決定 — 残響環境における現場で使用するためのエンジニアリング/調査方法
- ISO 4871:1996, 音響 - 機械および装置の騒音放出値の宣言と検証
- ISO 7574-4, 音響 — 機械および装置の公称騒音放出値を決定および検証するための統計的方法 — Part 4: 機械のバッチの公称値の方法
- ISO 9614-1, 音響学 — 音響強度を使用した騒音源の音響パワーレベルの決定 — Part 1: 離散点での測定
- ISO 9614-2, 音響学 — 音響強度を使用した騒音源の音響パワーレベルの決定 — Part 2: スキャンによる測定
- ISO 9614-3, 音響学 — 音響強度を使用した騒音源の音響パワーレベルの決定 — Part 3: スキャンによる正確な測定方法
- ISO 11203, 音響 — 機械および装置から放出される騒音 — 音響パワーレベルからのワークステーションおよびその他の指定された位置での放出音圧レベルの決定
- IEC 60034-1, 回転電気機械 - Part 1: 定格と性能
- IEC 61672-1, 電気音響学 — 騒音計 — Part 1: 仕様
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3741, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms
- ISO 3743-1, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room
- ISO 3743-2, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms
- ISO 3744:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
- ISO 3745:2012, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
- ISO 3746, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
- ISO 3747, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment
- ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and equipment
- ISO 7574-4, Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines
- ISO 9614-1, Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
- ISO 9614-2, Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
- ISO 9614-3, Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
- ISO 11203, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
- IEC 60034-1, Rotating electrical machines — Part 1: Rating and performance
- IEC 61672-1, Electroacoustics — Sound level meters — Part 1: Specifications