この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
ガス組成、不純物濃度、および物理的特性の決定は、サンプリング技術に大きく依存します。正しいサンプリング技術を使用することは、ガス分析における重要な安全性と品質の重要なステップです。危険な状況やサンプリングエラーを回避するためのサンプリング装置の設計、構造、および選択は重要であり、得られる結果に直接影響します。わずかな不注意、不正確さ、または間違いが、安全性と得られる結果に深刻な影響を与えます。
ガス製品は、圧縮ガスまたは液化ガスの形で、またはガスパイプラインを通じて圧力容器に保管および輸送されます。使用するサンプリング方法は、パッケージ、構成、および配送方法によって異なります。
このドキュメントは、分析目的で圧力容器およびパイプライン内のガスをサンプリングするための技術ガイドラインを提供します。
警告このドキュメントの使用には、多くの危険が伴う場合があります。このドキュメントは、その使用に関連するすべての安全性の問題を指定しているわけではありません。このドキュメントのユーザーは、ガスサンプリング中の安全を確保するための手段を確立する責任があります。
Introduction
The determination of gas composition, impurity concentration and physical properties depend, to a large extent, on sampling technique. The use of correct sampling techniques is an important safety and quality critical step in gas analysis. The design, construction and selection of the sampling equipment to avoid hazardous situations and sampling errors are important and directly influence the results obtained. Any slight carelessness, inexactitude or mistake will seriously influence safety and the results obtained.
Gaseous products are stored and transported in pressure receptacles in the form of compressed or liquefied gas or through gas pipelines. The sampling methods used differ depending upon the package, composition and delivery methods.
This document provides technical guidelines for the sampling of gases in pressure receptacles and pipelines for analytical purposes.
WARNING The use of this document can involve a number of hazards. This document does not specify all the safety issues associated with its use. Users of this document are responsible for establishing measures to ensure safety while gas sampling.