この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、超音波減衰スペクトルが粒子体積分率の線形関数である場合、希薄濃度で液体中に分散した粒子相のサイズ分布を決定するための超音波減衰分光法の要件を指定します。このレジームでは、粒子間相互作用は無視できます。コロイド、希釈分散液、およびエマルジョンは、このドキュメントの範囲内です。このような分析の典型的な粒子サイズは 10 nm から 3 mm の範囲ですが、この範囲外の粒子も正常に測定されています。懸濁液中の固体粒子のサイズ測定は、固相と液相の間の密度のコントラスト、粒子サイズ、周波数範囲に応じて、通常 0.1 体積% から最大 5 体積% の範囲の濃度で行うことができます[9 ,[10] .エマルションの場合、測定ははるかに高い濃度で行うことができます。これらの超音波法は、サイズ分布の動的変化を監視するために使用できます。
1 Scope
This document specifies requirements for ultrasonic attenuation spectroscopy methods for determining the size distributions of a particulate phase dispersed in a liquid at dilute concentrations, where the ultrasonic attenuation spectrum is a linear function of the particle volume fraction. In this regime particle-particle interactions are negligible. Colloids, dilute dispersions, and emulsions are within the scope of this document. The typical particle size for such analysis ranges from 10 nm to 3 mm, although particles outside this range have also been successfully measured. For solid particles in suspension, size measurements can be made at concentrations typically ranging from 0,1 % by volume up to 5 % by volume, depending on the density contrast between the solid and liquid phases, the particle size, and the frequency range[9],[10]. For emulsions, measurements can be made at much higher concentrations. These ultrasonic methods can be used to monitor dynamic changes in the size distribution.