この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 58, ガスボンベ、小委員会 SC 4, ガスボンベの運用要件です。
この第 3 版は、次の変更で技術的に改訂された第 2 版 (ISO 21007-2:2013) を取り消し、置き換えます。
- 新しい登録機関が附属書 B に追加されました。
- 新しい附属書 E が追加されました。
- RFIDコードのリストとガスボンベ製造業者のマークを提供していた以前の附属書Cは、ISO 21007のこの部分から削除され、別の文書ISO/TR 17329で公開される予定です。
ISO 21007 は、次の部分で構成されており、一般的なタイトルはガスボンベ - 無線自動識別技術を使用した識別とマーキングです。
- Part 1: リファレンス アーキテクチャと用語
- Part 2: 無線自動識別の番号付けスキーム
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 58, Gas cylinders, Subcommittee SC 4, Operational requirements for gas cylinders.
This third edition cancels and replaces the second edition (ISO 21007-2:2013), which has been technically revised with the following changes:
- a new registration body has been added to Annex B;
- a new Annex E has been added;
- the former Annex C, which provided a list of RFID codes, as well as marks for gas cylinder manufacturers, has been removed from this part of ISO 21007 and will be published in a separate document, ISO/TR 17329.
ISO 21007 consists of the following parts, under the general title Gas cylinders — Identification and marking using radio frequency identification technology:
- Part 1: Reference architecture and terminology
- Part 2: Numbering schemes for radio frequency identification