この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語、定義、数値表記
3.1 用語と定義
このドキュメントの目的のために、ISO 21007-1 および以下に記載されている用語と定義が適用されます。
3.1.1
ビットレート
データコーディングに関係なく、1 秒あたりのビット数
3.1.2
キャリア周波数
ダウンリンク/アップリンク帯域の中心周波数
3.1.3
構築する
ASN.1 メッセージを形成するための 1 つまたは複数のプリミティブ コンストラクト
3.1.4
データコーディング
ベースバンド信号の表現を決定するコーディング、つまり、物理信号への論理ビットのマッピング
注記 1:例としては、バイフェーズ方式 (マンチェスター、ミラー、FM0, FM1, 差分マンチェスター)、NRZ および NRZ1 があります。
3.1.5
変調
一般に理解されている方法論に従って記述された符号化データによる搬送波のキーイング (振幅シフト キーイング、周波数シフト キーイング)
3.1.6
オクテット
8 つの 2 進数 (ビット) のセット
3.1.7
通信ゾーン内の電力制限
タグの前の 0 dB アンテナを基準とした入射電力の最小値と最大値を決定する制限
注記 1:これらの 2 つの値は、タグ レシーバーのダイナミック レンジも指定します。パワー値は、雨や位置ずれによる追加の損失なしで測定されます。
3.1.8
登録機関
発行者 ID を発行して追跡する資格を持つ組織
注記 1:例については、附属書 B を参照。
3.1.9
キャリア周波数の許容範囲
パーセンテージで表したキャリア周波数の最大偏差
3.2 数値表記
ISO 21007 のこの部分で使用される数値表記は次のとおりです。
- 10 進数 (「通常」) 表記には添え字がありません。たとえば、127 です。
- 16 進数は下付き文字 16 で表されます (例: 7F 16 )
- 2 進数は下付き文字 2 で示されます (例: 01111111 2 )
参考文献
| [1] | 危険物の輸送に関する国連勧告 — モデル規則、修正版 |
| [2] | ISO/IEC 8824-2, 情報技術 — 抽象構文記法 1 (ASN.1): 情報オブジェクトの仕様 |
| [3] | ISO/IEC 8824-3, 情報技術 — 抽象構文記法 1 (ASN.1): 制約仕様 |
| [4] | ISO/IEC 8824-4, 情報技術 — 抽象構文記法 1 (ASN.1): ASN.1 仕様のパラメータ化 |
| [5] | ISO/IEC 1800, 情報技術 — アイテム管理のための無線自動識別 |
3 Terms, definitions and numerical notations
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 21007-1 and the following apply.
3.1.1
bit rates
number of bits per second, independent of the data coding
3.1.2
carrier frequency
centre frequency of the downlink/uplink band
3.1.3
construct
one or more primitive constructs to form an ASN.1 message
3.1.4
data coding
coding that determines the baseband signal presentation, i.e., a mapping of logical bits to physical signals
Note 1 to entry: Examples are bi-phase schemes (Manchester, Miller, FM0, FM1, differential Manchester), NRZ and NRZ1.
3.1.5
modulation
keying of the carrier wave by coded data described in accordance with commonly understood methodologies (amplitude shift keying, frequency shift keying)
3.1.6
octet
set of eight binary digits (bits)
3.1.7
power limits within communication zone
limits that determine the minimum and maximum values of incident power referred to a 0 dB antenna in front of the tag
Note 1 to entry: These two values also specify the dynamic range of the tag receiver. Power values are measured without any additional losses due to rain or misalignment.
3.1.8
registration body
organization entitled to issue and keep track of issuer identification
Note 1 to entry: For examples, see Annex B.
3.1.9
tolerance of carrier frequency
maximum deviation of the carrier frequency expressed as a percentage
3.2 Numerical notations
The numerical notations used in this part of ISO 21007 are as follows:
- decimal (“normal”) notation has no subscript, e.g. 127;
- hexadecimal numbers are noted by subscript 16, e.g. 7F16;
- binary numbers are noted by subscript 2, e.g. 011111112.
Bibliography
| [1] | UN Recommendations on the Transport of Dangerous Goods — Model Regulations, as amended |
| [2] | ISO/IEC 8824-2, Information technology — Abstract Syntax Notation One (ASN.1): Information object specification |
| [3] | ISO/IEC 8824-3, Information technology — Abstract Syntax Notation One (ASN.1): Constraint specification |
| [4] | ISO/IEC 8824-4, Information technology — Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications |
| [5] | ISO/IEC 18000 (all parts), Information technology — Radio frequency identification for item management |