ISO 22282-1:2012 地盤調査とテスト—地盤水力テスト—パート1:一般規則 | ページ 5

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

2 規範的参照

この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

  • ISO 14688-1, 地盤工学の調査と試験 — 土壌の識別と分類 — Part 1: 識別と説明
  • ISO 14689-1, 地盤工学の調査と試験 — 岩石の識別と分類 — Part 1: 識別と説明
  • ISO 22282-2, 地質工学的調査および試験 - 地盤水理試験 - Part 2: オープンシステムを使用したボーリング孔内の透水性試験
  • ISO 22282-3, 地盤工学の調査と試験 — 地盤水圧試験 — Part 3: 岩石の水圧試験
  • ISO 22282-4, 地盤工学の調査および試験 — 地水圧試験 — Part 4: ポンプ試験
  • ISO 22282-5, 地盤工学的調査および試験 — 地盤水圧試験 — Part 5: 浸透計テスト
  • ISO 22282-6, 地盤工学の調査および試験 - 地盤水理試験 - Part 6: 閉鎖システムを使用したボーリング孔内の透水性試験
  • ISO 22475-1:2006, 地質工学の調査と試験 — サンプリング方法と地下水の測定 — Part 1: 実行のための技術原則
  • EN 1990, ユーロコード: 構造設計の基礎
  • EN 1997-1:2004, ユーロコード 7: 地盤工学設計 — Part 1: 一般規則
  • EN 1997-2:2007, ユーロコード 7: 地盤工学設計 — Part 2: 地盤の調査と試験

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO 14688-1, Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description
  • ISO 14689-1, Geotechnical investigation and testing — Identification and classification of rock — Part 1: Identification and description
  • ISO 22282-2, Geotechnical investigation and testing — Geohydraulic testing — Part 2: Water permeability tests in a borehole using open systems
  • ISO 22282-3, Geotechnical investigation and testing — Geohydraulic testing — Part 3: Water pressure tests in rock
  • ISO 22282-4, Geotechnical investigation and testing — Geohydraulic testing — Part 4: Pumping tests
  • ISO 22282-5, Geotechnical investigation and testing — Geohydraulic testing — Part 5: Infiltrometer tests
  • ISO 22282-6, Geotechnical investigation and testing — Geohydraulic testing — Part 6: Water permeability tests in a borehole using closed systems
  • ISO 22475-1:2006, Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 1: Technical principles for execution
  • EN 1990, Eurocode: Basis of structural design
  • EN 1997-1:2004, Eurocode 7: Geotechnical design — Part 1: General rules
  • EN 1997-2:2007, Eurocode 7: Geotechnical design — Part 2: Ground investigation and testing