この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 161, ガスおよび/またはオイルバーナーおよび器具の制御および保護装置です。
この第 2 版は、技術的に改訂された第 1 版 (ISO 23553-1:2007) を取り消して置き換えるものです。また、技術正誤表 ISO 23553-1:2007/Cor1:2009 も組み込まれています。
ISO 23553 は、以下の部分で構成されており、一般的なタイトルは、石油バーナーおよび石油燃焼器具用の安全および制御装置 - 特定の要件:
- Part 1: 自動および半自動バルブ。
ISO 23553 のこの部分には、前版と比較して次の重要な技術的変更が組み込まれていることに注意してください。
- a)シャットオフバルブから自動および半自動バルブへのタイトルの変更;
- b)自動弁および半自動弁への範囲の拡大。
- c)バルブのさらなる分類の導入;
- d) IEC 60730-1:2010 の一般的な電気的要求事項への参照を含める;
- e) IEC 60730-2-19 からの非電気的要件の統合;
- f)バルブに対して変更不可能な IEC 60730-2-19 からの電気的要件の統合。
- g) 7.7.103 項「電動弁の耐久性試験」を含める。
- h) DN 15 までのバルブの耐久サイクルの変更。
- i)バルブ ≤ DN 50 の内部漏れの拡張限界;
- j)閉鎖機能のテストが更新されました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 161, Control and protective devices for gas and/or oil burners and appliances.
This second edition cancels and replaces the first edition (ISO 23553-1:2007), which has been technically revised. It also incorporates the Technical Corrigendum ISO 23553-1:2007/Cor1:2009).
ISO 23553 consists of the following parts, under the general title Safety and control devices for oil burners and oil-burning appliances — Particular requirements:
- Part 1: Automatic and semi-automatic valves.
It should be noted that the following significant technical changes compared to the previous edition have been incorporated in this part of ISO 23553:
- a) change of the title from shut-off valves to automatic and semi-automatic valves;
- b) extension of the scope to automatic and semi-automatic valves;
- c) introduction of further classifications for valves;
- d) inclusion of references to the general electrical requirements of IEC 60730-1:2010;
- e) integration of non electrical requirements from IEC 60730-2-19;
- f) integration of electrical requirements from IEC 60730-2-19 which are unalterable for valves;
- g) inclusion of the subclause 7.7.103 “Test of endurance of electrically operated valves”;
- h) change of endurance cycles for valves up to DN 15;
- i) extended limits of internal leakage for valves ≤ DN 50;
- j) test of closing function updated.